During the kitchen renovation, there were 2 upper and lower water inlet pipes left under the washing

Updated on Kitchen 2024-10-06
1 answers
  1. Anonymous users2024-01-24

    Is it hot water from the bathroom, in this case, the water heater in the bathroom must be turned on, and the water will be released for a longer time, which is caused by a long line.

Related questions
Dredging the sewage pipes under the kitchen washing basin
1 answers2024-10-06

Dressed as a kitchen biography, the vulgar word is mistaken for a kitchen - "Hanshu Xuandi Ji". >>>More

1 or 2 kitchen sinks are better
3 answers2024-10-06

Two good. Sometimes there are vegetables and fruits and others. So, the two are convenient to use.

What kind of washing basin to use to decorate the kitchen
2 answers2024-10-06

Now they are all made of stainless steel, which is cheap and strong and easy to clean.

There is a vegetable sink next to the kitchen door, and I want to bury the sink pipe in the kitchen
1 answers2024-10-06

Do you live on the first floor? Of course, it is possible to bury it underground, you have to put the slope well, and there must be a filtration device at the sewer end, otherwise it will be blocked, you know. It is also necessary to prevent the water from coming up, that is, the water on your roof must be ten centimeters higher than the surface drainage outside.

The sewer pipe in the kitchen is too high, resulting in too much water accumulation in the sewer pip
3 answers2024-10-06

There is no need to retrofit the main pipe. 1. Leave a section of the branch pipe after the tee connecting the main pipe, and then cut it directly; 2. Insert the basin water hose directly into the inclined tee position; 3. The insertion port is sealed with glass glue. If the branch pipe is higher than the basin trap, you can remove the trap and use the hose below to make the trap function (shape).