-
Anonymous users2024-01-24The house must use a lot of materials to decorate the house when decorating, the space used by different materials is different, the bathroom waterproof material has always been what many people want to know, the following will introduce the construction characteristics of the bathroom wall waterproofing with polypropylene cloth, and what are its advantages.
1. Adopt room temperature structure, directly add cement and special rough draft support rubber, paste composite coil and base layer. It is more convenient and faster than the traditional hot and cold construction, reduces labor intensity, reduces environmental pollution, and improves work efficiency.
2. Using the belt connection method, the material of the composite coil can adapt to the deformation of the base layer. The detailed structure and waterproofing treatment of the joint are enhanced by bonding 300g m2350g m2 of composite cement glue in an additional layer to ensure weak bonding and assembly. The quality of the waterproofing system engineering.
3. The construction of the waterproof layer is simple and convenient, not affected by moisture and primer station, the material stability is good, non-toxic and tasteless, and the impact on the surrounding environment is small, which greatly improves the working conditions.
2. What are the advantages of using polypropylene cloth to make bathroom wall waterproofing?
1. The waterproof membrane composed of polypropylene polyethylene SBC120 is a completely viscous structure, which can be used without drumming to slow down the horizontal drowning of tung trees. The waterproof material composed of SBC120 double-sided mask realizes the construction of total adhesion under the action of the protective layer, which can effectively prevent aging, does not allow flooding of the drum, and cannot be level.
2. The waterproof membrane composed of SBC120 polyethylene polypropylene and the base layer forms an integrated waterproof structure.
3. The waterproof membrane composed of polypropylene polyethylene SBC120 can be built in rainy days to ensure the progress of the project.
It can be applied on rainy days (with a moisture content of 50% or more) using polymer cement. The waterproofing membrane composed of SBC120 polyethylene polypropylene is not limited by the moisture content of the base layer below 9%, which guarantees the progress of the structure.
4. Glued cement rock, which filial piety. The waterproofing membrane made of the polyethylene material SBC120 polyethylene is characterized by uniform surface roughness and ease of connection. It is suitable for bonding various materials.
It can be bonded directly to cement materials during the solidification process with an adhesive strength of 15N cm. This is a property that is not found in other waterproofing materials.
-
Anonymous users2024-01-23The house must use a lot of materials to decorate the house when decorating, the space used with the same material is different, the bathroom waterproof material has always been a lot of people want to know, the following will introduce the construction characteristics of the bathroom wall waterproofing with polypropylene cloth, and what are its advantages.
1. The construction characteristics of using polypropylene cloth to make bathroom wall waterproofing 1. Adopt a normal temperature structure, directly add cement and special support rubber, and paste composite coils and base layers. It is more convenient and faster than the traditional hot and cold construction, reduces labor intensity, reduces environmental pollution, and improves work efficiency.
2. Using the belt connection method, the material of the composite coil can adapt to the deformation of the base layer. The detailed structure and waterproofing treatment of the joint are enhanced by bonding 300g m2350g m2 of composite cement glue in an additional layer to ensure weak bonding and assembly. The quality of the waterproofing system engineering.
3. The construction of the waterproof layer is simple and convenient, not affected by moisture and primer station, the material stability is good, non-toxic and tasteless, and the impact on the surrounding environment is small, which greatly improves the working conditions.
2. What are the advantages of using polypropylene cloth to make bathroom wall waterproofing 1. The waterproof membrane composed of polypropylene polyethylene SBC120 is a completely viscous structure, which is not used without drumming, eliminating horizontal drowning. The waterproof material composed of SBC120 double-sided mask realizes the construction of total adhesion under the action of the protective layer, which can effectively prevent aging, does not allow flooding of the drum, and cannot be level.
2. The waterproof membrane composed of SBC120 polyethylene polypropylene and the base layer forms an integrated waterproof structure.
3. The waterproof membrane composed of polypropylene polyethylene SBC120 can be built in rainy days to ensure the progress of the project.
It can be applied on rainy days (with a moisture content of 50% or more) using polymer cement. The waterproofing membrane composed of SBC120 polyethylene polypropylene is not limited by the moisture content of the base layer below 9%, which guarantees the progress of the structure.
4. Glued cement. The water-repellent membrane made of the polyethylene material SBC120 polyethylene shirt is characterized by its uniform surface roughness and ease of connection. It is suitable for bonding various materials.
It can be bonded directly to cement materials during the solidification process with an adhesive strength of 15N cm. This is a property that is not found in other waterproofing materials.
The above describes the characteristics of using polypropylene cloth to make bathroom wall waterproofing, you can refer to the above text.
-
Anonymous users2024-01-221. Adopt room temperature structure, directly add cement and special support rubber, paste composite coil and base layer. It is more convenient and faster than the traditional hot and cold construction, reduces labor intensity, reduces environmental pollution, and improves work efficiency.
2. Using the belt connection method, the material of the composite coil can adapt to the deformation of the base layer. The detailed structure and waterproofing treatment of the joint are enhanced by bonding 300g m2350g m2 of composite cement glue in an additional layer to ensure weak bonding and assembly. The quality of the waterproofing system engineering.
3. The construction of the waterproof layer is simple and convenient, not affected by moisture and primer station, the material stability is good, non-toxic and tasteless, and the impact on the surrounding environment is small, which greatly improves the working conditions.
1. The waterproof membrane composed of polypropylene polyethylene SBC120 is a completely viscous structure, which is not used without drumming, eliminating horizontal drowning. The waterproof material composed of SBC120 double-sided mask realizes the construction of total adhesion under the action of the protective layer, which can effectively prevent aging, does not allow flooding of the drum, and cannot be level.
2. The waterproof membrane composed of SBC120 polyethylene polypropylene and the base layer forms an integrated waterproof structure.
3. The waterproof membrane composed of polypropylene polyethylene SBC120 can be built in rainy days to ensure the progress of the project.
It can be applied on rainy days (with a moisture content of 50% or more) using polymer cement. The waterproofing membrane composed of SBC120 polyethylene polypropylene is not limited by the moisture content of the base layer below 9%, which guarantees the progress of the structure.
4. Glued cement. The waterproofing membrane made of the polyethylene material SBC120 polyethylene is characterized by uniform surface roughness and ease of connection. It is suitable for bonding various materials.
It can be bonded directly to cement materials during the solidification process with an adhesive strength of 15N cm. This is a property that is not found in other waterproofing materials.
The above is toldUse polypropylene cloth to make the bathroom wall waterproof You can refer to the above text.
There is no impact.
Remember to do waterproofing before tiling, and do it two or three times on all four facades and floors of the room. It is useless to do waterproofing after pasting tiles, you must do waterproofing before pasting tiles, otherwise it will leak after a long time. >>>More
Like this, it can also be done twice, and the effect will be better if you do it twice, but the two must be spaced apart, and the second time will be done after the first time it is dry.
It is recommended to use waterproof coatings, and the use of polypropylene lap edges is prone to leakage. Waterproof process: base treatment, cleaning, leveling layer, bonding layer, detail additional layer, acrylic waterproof layer, water storage test, protective layer construction, secondary water storage test. >>>More
The area of the bathroom is relatively small, there are many pipes, if the polypropylene membrane is used, it is not easy to cut and paste, and there will be a pungent smell, which is not very environmentally friendly indoors. The cement-based coating is a waterproof material that has both high elasticity of synthetic polymer materials and good durability of inorganic materials. Environmental protection is good, there is no pungent smell, waterproof cement-based coating is relatively simple, and it also has good flexibility, so the cement-based coating for waterproofing in the bathroom is better.
Washing hands waterproof do not need to make so complicated, with flexible waterproof brush three or four times on it, it will definitely not leak, washing hands to do polypropylene construction is inconvenient, with a cloth and four oil is not environmentally friendly.