What should be the waterproof height of the wall of the home improvement bathroom?

Updated on Bathroom 2024-10-05
1 answers
  1. Anonymous users2024-01-24

    Everyone knows that the bathroom must be damp and watery for a long time. If you are immersed in water for a long time, the bathroom walls may fall and the tiles on the bathroom floor may become entangled. This will affect the aesthetics of the entire bathroom, so do a good job of waterproofing the bathroom.

    Let's see if its waterproof height and waterproof specifications are suitable.

    The waterproofing of the bathroom floor is an important part of the decoration, so the waterproofing of the floor must be done well. The floor of the bathroom is waterproof, usually with reinforced concrete slabs, cement mortar 1:3 to find the slope layer, the thinnest part of the floor must also have a 20 mm thick dry cement mortar adhesive layer and 30 mm thick, inclined to the floor drain.

    What is the waterproof height of the bathroom - the waterproof height of the wall of the home improvement bathroom.

    The waterproof height of the wall is generally 30 cm. When the unloaded wall is impervious, its general waterproof height is at least in meters. It is the wall with a waterproof layer of 30 cm to pre-prevent water from penetrating into the wall.

    The waterproofing of the wall of the bathroom with a shower should be 180 cm; The wall near the bathtub must be 30 cm more waterproof than the bathtub.

    The waterproof height of the wall of the home improvement bathroom.

    When tiles are installed on the floor of the bathroom, cement mortar is used to level the floor and apply a waterproof coating, in addition to the impermeable layer below the surface layer. The contact between the impervious layer of the floor and the walls should be upward, about 25 30 cm from the ground, and drainage should not be allowed. Odors from the pipes overflow into the drains and into the room to avoid problems such as clogged drains.

    The waterproof height of the wall of the home improvement bathroom.

    Waterproofing of urinals. The wall of the bathroom in contact with the small sink is 300 mm above the floor of the sink, your bathroom is not a toilet but a bedpan, so the water resistance is 1800 mm above the floor. The pipes pass through the floor of the bathroom (including the shell) and are waterproof at a height of about 100 meters above the root of the pipes.

    Summary: The above refers to the waterproof height of the bathroom. There are certain regulations for the waterproofing of the bathroom, which is also an important guarantee for the waterproofing of the bathroom. Therefore, when doing waterproofing, the waterproof height must be qualified.

Related questions
3 answers2024-10-05

The height standard of the waterproof layer of the bathroom should be determined according to the different positions, first of all, the waterproof layer of the wall is generally 30 cm upwards from the corner of the wall, the height of the bathing place is generally 180 cm, the height of the basin is 100 cm, the waterproof layer and the ground waterproof are required to do 2 times, do not leave the construction joint in the corner of the wall when waterproofing, the ground waterproof layer should be painted out of the bathroom door 30 cm high, the waterproof floor waterproof layer should be 20 cm higher than the ground.

2 answers2024-10-05

1. All in the regulations, under normal circumstances, the shower area is at least 1800 mm high, and the other walls are 500 mm high. The requirements of the bathroom waterproof standard are that the ground needs to be done all, and the wall is at least full high, and if it is a lightweight wall, then it must be done full height. As for the material, it is recommended to use kitchen and bathroom waterproof slurry.

1 answers2024-10-05

The bathroom wall is waterproof and moisture-proof, and it may be 1.8 meters, and it depends on whether there is a wardrobe on the back, and if there is a wardrobe, it may be higher.

5 answers2024-10-05

You can do this, so that the meter is worried about the shower water dripping on the wall, if you leave the shower, do one meter is enough.

3 answers2024-10-05

For the waterproof wall waterproof height, it is generally necessary to do 30 cm high waterproof treatment, non-load-bearing wall, when waterproofing the whole wall, its basic waterproof height should be at least 1 8 meters high. The wall waterproof coating should be about 30cm high to prevent water from penetrating the wall and returning moisture. The waterproof height of the wall of the bathroom with a shower room should generally be 180cm; If there is a bathtub, the waterproof height of the wall adjacent to the bathtub should be 30cm higher than the bathtub. >>>More