How to remove the faucet in the kitchen in a hurry, it is always dripping, and I want to dismantle i

First close the main valve of the water, and then look at the bottom of the basin, there is a hose and the faucet connected, remove the hose with a wrench, and then grab the faucet from the top of the basin with your hand, and the other hand from the bottom of the basin to screw the big lock mother that fixes the faucet, this big lock is very loose, you can unscrew it by hand, after removing the big lock mother, the faucet can be taken down from the top of the basin.

1. There is a red and blue plastic cap on the faucet handle, buckle it first;

2. Use a small slotted screwdriver to stick through this hole, loosen the small screw, and remove the handle;

3. Rotate the cover counterclockwise and remove it;

3. Use a larger wrench to remove the fastening screws counterclockwise, and the valve core will be taken out.

Let's stainless steel.

The copy basin is lifted from the top of the marble countertop, you can see the lower part of the water faucet, there are two zhi8mm copper screws, Luo hats, and two water pipe DAO joints, you need to remove the two water pipe joints [one is a hot water pipe, one is a cold water pipe] Use a wrench to remove, and then remove the two screws that fix the faucet, you can replace the new faucet, pay attention to don't forget to close the main valve of the water pipe when replacing the faucet, and you must also close the hot water pipe, If the hot water pipe can't be turned off, you have to put the solar-powered hot water out.

The left hand reaches under the basin and holds the wire under the water faucet to prevent it from moving, and the right hand twists the faucet on the basin (counterclockwise) and it will fall.