How do you remove the faucet base of the kitchen sink?

1. Close the main sluice.

2. Remove the two screws at the lower end of the water pipe with pliers.

3. Turn the sink over and easily unscrew the two leaking pipes.

4. Twist the upper end of the new pipe to the lower end of the faucet.

5. Twist the lower screws of the new pipe to the water pipe.

Reach under the sink and loosen the wire underneath the faucet to remove the faucet from above.

Prepare the tools you need, such as pliers, wrenches and screwdrivers, and if you only need to replace the faucet parts, then you need to prepare the parts that need to be replaced, and turn off the main valve.

If the screws of the faucet are attached under a plastic sheet, plastic button, or metal button, the handle screws mounted on the top of the faucet can be removed by simply opening the button.

In the process of replacement, some water inlet hoses have been used for a long time, and there will be rust or catalytic fasteners, so that the water inlet hose can not be unscrewed, in this case, you can drip oil on the rusty place, and then take out the basin faucet.

Disassemble the hose under the sink from the angle valve and turn the sink over so that it is easy to remove the hose that connects to the faucet.