What are the decoration processes of the bathroom?

Wrap the pipe first, and then install the squatting toilet, and the toilet does not need to be installed first. Then do waterproofing, at least twice, dry the first time and then apply the second time, and if there is a shower, brush the wall waterproof to a meter height. Install the swing door, if it is a sliding door, the last installation.

Again paste wall tiles and floor tiles, and finally carry out the ceiling. In this way, the whole bathroom is basically renovated.

The bathroom is best separated from wet and dry, if there is a stone foundation in the middle to separate the ground, then you need to see whether the floor drain is in both spaces, that is, a floor drain in the dry room, a floor drain in the wet room, the use is guaranteed, tell the bricklayer master in advance when tiling, and take the stone foundation and the floor drain back for installation.

Bathrooms are generally attached to floor tiles and wall tiles, and when purchasing wall tiles, you need to pay attention to water resistance and glaze quality, and wall tiles can also play a waterproof effect to a certain extent. When buying floor tiles, it is recommended to choose dark colors, which are more resistant to pollution, and at the same time, the quality must be guaranteed.

1. Hydropower transformation.

1. Laying of water supply pipes.

2. The wall circuit is embedded.

2. Waterproof measures.

1. The waterproof measures of the bathroom are a necessary project, and the waterproof coating in the bathroom extends from the ground to the wall.

2. Bathroom waterproofing is mainly: wall and ground waterproofing.

3. Paving tiles.

1. Ceramic tile is the decorative material of the floor and wall of the bathroom, which can not only strengthen the waterproof effect of the wall and the ground, but also have a good decorative effect.

2. Bathroom tiling is mainly: wall tile paving.

Fourth, ceiling decoration.

The water vapor in the bathroom tends to rise to the ceiling, so the decorative materials of the ceiling must also have the performance of waterproof, moisture-proof, corrosion-proof and high-temperature resistance. The common bathroom ceiling material is aluminum gusset.

5. Install a bathtub.

6. Bathroom basin device.

7. Bathroom faucets and hardware devices.