What is the general decoration process of the bathroom

What is the bathroom renovation procedure? What are the steps of bathroom decoration?

Under the door frame, stainless steel sheets are embedded to prevent decay.

Bathroom doors are often in a watery or humid environment, and the bottom of the door frame will decay unconsciously, so you can consider removing the damaged parts below for proper repair, and then embedding stainless steel sheets around the door frame to slow down or prevent the door frame from decaying.

Mirrors are installed on the cabinet façade.

In order to store some hygiene products, cabinets are often set up in the bathroom, or wall cabinets are made on the wall. If in the cabinets or recessed facades.

Install shower heads on the washbasin.

People are accustomed to washing their hair and bathing at night, and their hair is often messy after sleeping, so the number of people, especially women, who wash their hair in the morning gradually increases. Because it is more troublesome to use the shower equipment every time you wash your hair, this problem is solved by installing a shower head on the washbasin. A 10 cm shelf is nailed around the washbasin for ease of use.

Putting a lot of hygiene products on the washbasin can look disorganized and easy to knock over, so it's a good idea to nail a 10 cm shelf around the washbasin to fit a makeup bottle, brush, toiletry cup, etc. The height of the shelf should not hinder the use of the faucet, and the shelf material can be wood, plastic board, etc.

Make a notch in the wall around the tub to place toiletries.

Make a hole seven or eight centimeters deep in the wall around the bathtub and lay the same tiles as the wall, which can be used to store toiletries and other things. This expands the use of space, and it is easy to use, and the bathroom looks orderly. for the elderly and the sick.

Install handrails. For the elderly, the sick or people with physical disabilities, it is more difficult to bend over, stand and other movements. Therefore, it would be of great help to them if there was something to support them. Installing handrails on the walls next to the flush toilet will help them use the toilet.

Make use of the space above the flush sink.

The flush sink of the flush toilet is a place that cannot be reached when using the toilet, and we can use this space to make a wall cabinet with a depth of about 15 cm, so as not to cause inconvenience to people. Toilet paper, hand towels, detergent, feminine hygiene products, etc. can be placed in the cabinet, and the lower part can also be made open and decorated with some green plants.

Precautions. Cabinets come in a variety of forms, from open spaces to closed drawers to meet practical needs such as storing towels, cleaning supplies, cosmetics and more. If you are equipped with a good perfume in the bathroom and play slowly, it will better reflect the warmth of the family.

First, the decoration steps.

1. Design. 2. Do pipelines (water and electricity).Pipeline pressure test.

3. Waterproof. 4. Laying bricks.

5. Measure the size (wash basin, toilet, shower room.) Suspended ceilings,)

6. Installation. 7. Acceptance.

2. Decoration precautions.

1. Pipeline: There are upper and lower pipes in the pipe, and there are two kinds of hot and cold water pipes to be considered, as well as the problem of solar energy, washing machines and other electrical appliances on the water. If you have a dry and wet separation in the original bathroom, you should also consider whether to reserve a faucet in the bathroom, you can leave a faucet for washing and mopping, cleaning faucets, don't be too troublesome, once in place, it is very convenient to use in life.

2. Circuit: The circuit is mainly to consider the reserved wiring port of lighting, water heater, washing machine and other electrical appliances, it is best not to connect the socket in the bathroom, and it is necessary to consider the layout in advance to leave the terminal well, because the bathroom environment is humid and the socket is easy to leak electricity in the humid environment for a long time, resulting in the tragedy of electric shock, even if the socket is occasionally used, the toilet will inevitably have a splash, and there is a chance of leakage in case of splashing, so it is necessary to prevent the tragedy from happening. The lines are all to be chiseled into the wall, so they must be designed before laying wall tiles and floor tiles.

It is best to install a leakage protector in the bathroom.

3. Floor tiles and wall tiles: If you don't like the bathroom tiles that come with your house, you must smash them completely, and don't smash part of them after signing, so that not only is it aesthetically incompatible, but the most important thing is that it is not integrated, and the joints will seep water.

4. Ceiling: Generally, the market is full of aluminum gusset ceilings, and the life of aluminum gusset is longer than that of PVC at home, and the aluminum gusset is of good quality, there are many shapes on the layout, and the price is not very expensive.

5. The washing machine should not be too close to the bathing place, the washing machine is splashed by water, the swimsuit is rusty and may leak, and the hand dryer is installed next to the sink for easy use.

6. If the bathroom space allows, it is best to make two small cabinets for storage, and the cashier is very important.

Hydropower renovation: The bathroom will plan to the bath bomb heating, the wiring of the lamp, the wall of the water pipe, etc., during which in order to speed up the day and increase the space, some hydropower renovation is also indispensable, in the decoration process, the bathroom can be planned in detail. It is necessary to pay attention to the fact that the more water and electricity renovation is not as good as possible, it is enough to be convenient, and the shading direction can be considered without entering the wall, saving money and not affecting the aesthetics.

Inlaid wall tiles, suspended ceilings, laying floor tiles, installing toilets, washbasins, bathtubs, connecting water supply and drainage pipes, installing lamps, sockets, mirrors, towel rods and other hardware accessories.

Tiles: After laying the wall and floor tiles (about 3cm), the practical pit spacing of the toilet is 31cm, and now the toilet pit spacing standard is mostly 30cm or 40cm, so it is estimated that there will be a small gap from the wall, which should be negligible. The orientation of the angle valve may block the toilet device (the back seat of the toilet is the closed space), so in this case, the toilet with space at the back should be selected (so that the toilet style is less selective, and the angle valve is not easy to operate in the toilet).

Attention to detail in bathroom décor. The water heater is best installed on the load-bearing wall and is robust. It is better to leave a satisfactory open space between the two ends of the water heater and the wall to facilitate maintenance; The washbasin countertop should be of moderate size and height (H75-85cm depending on height), and the undercounter basin should be easy to clean.

Waterway request for the basin: 50cm from the ground from the ground, 10-15cm from the hot and cold water, it is best to ensure that the hot and cold water pipes are at the base of the basin; The lights in the bathroom should be bright and not dim, incandescent lamps or natural lights should be used, and lamps, mirrors, and doors should be anti-foggy.

Washbasin: The size and height of the washbasin countertop should be moderate (H75-85cm depending on the height), and the undercounter basin is easy to clean. Waterway request for a washbasin:

The hot and cold water is 50cm away from the ground, and the distance between hot and cold water is 10-15cm. If the distance between the water heater and the washbasin is far away and it is inconvenient to supply hot water, then it is necessary to find another way, such as installing a washbasin under the water heater, the size and height of the washbasin countertop for winter should be moderate (H75-85cm depending on the height), and the undercounter basin is easy to clean. Waterway request for a washbasin:

The hot and cold water is 50cm away from the ground, and the distance between hot and cold water is 10-15cm. If the distance between the water heater and the washbasin is not convenient to supply hot water, then you have to find another way, such as installing a washbasin under the water heater for winter.

Install the sewer first, then the pit of the toilet, then the floor, then the floor tiles,

1. Hydropower transformation.

1. Laying of water supply pipes.

2. The wall circuit is embedded.

2. Waterproof measures.

1. The waterproof measures of the bathroom are a necessary project, and the waterproof coating in the bathroom extends from the ground to the wall.

2. Bathroom waterproofing is mainly: wall and ground waterproofing.

3. Paving tiles.

1. Ceramic tile is the decorative material of the floor and wall of the bathroom, which can not only strengthen the waterproof effect of the wall and the ground, but also have a good decorative effect.

2. Bathroom tiling is mainly: wall tile paving.

Fourth, ceiling decoration.

The water vapor in the bathroom tends to rise to the ceiling, so the decorative materials of the ceiling must also have the performance of waterproof, moisture-proof, corrosion-proof and high-temperature resistance. The common bathroom ceiling material is aluminum gusset.

5. Install a bathtub.

6. Bathroom basin device.

7. Bathroom faucets and hardware devices.