-
Anonymous users2024-01-24The panel area is each square meter, and 18 sheets is a square meter.
Generally, a good paint can achieve a better effect by doing three bottoms and two sides. The coating rate of paint mixture is generally 10-12 square meters, and the primer is painted three times with an area of 155 square meters, which is about 13KG; The area of two coats of topcoat is square meters, and about 10KG of paint is required; If it is a 5kg set, you need 3 sets of primers and 2 sets of topcoats;
The above accounting refers to the amount of construction on one side, if both sides are constructed, multiply by 2. However, it seems that it is rare to do both sides, and at most the inner surface is primed once.
-
Anonymous users2024-01-23A set of lacquer can be brushed about 20 flats.
-
Anonymous users2024-01-22Are you trying to ask if the paint is enough?
The area of 18 large core boards is about 52 square meters, and a liter of paint can be brushed about 6 to 8 square meters, which depends on the thickness of the brush, and the primer and topcoat should be separated. >>>More
Personally, I think that rosewood veneer is good for furniture paint and varnish, which can maintain the true color of the wood and highlight the characteristics of the wood itself, such as color, pattern, etc., giving people a sense of reality; If you do color matching, it will give people an unreal feeling.
The putty is batch at least twice, and the primer can be brushed after polishing, and in the process of painting, if there are uneven places, the putty still needs to be repaired. The primer is generally brushed twice or more, and the topcoat: if you use polyester paint, you can survive by brushing it 2 or 3 times. >>>More
You're just by area, right? It is necessary to consider the problem of remaining materials, and also consider the direction of the wood grain. The paint area is according to the material list*2 because both sides have to be done. The wage does not exceed 10 yuan per square meter.
This problem is actually a bit complicated, first of all, you have to understand the spraying process, such as sealing the bottom, primer, topcoat, putty, putty, grinding, etc., the paint and tools required for each process are different, and now the general big brands are more environmentally friendly, just search on it.