What should I do if the hardwood floor is blistered?

As long as the floor is not rotten, it expands after absorbing water, and the floor arches. Remove the baseboard first, and then remove the wooden floor to dry, but after drying, it should not return to its original appearance. Because the wooden floor is also deformed after drying.

But it doesn't matter, you can cut off more parts during installation. There should be no problem after installation. After installation, it will not affect the overall effect.

Answer: Hello, 1. If the wooden floor is soaked in water, the water on the surface of the wooden floor should be sucked dry in a short time, and then the vacuum cleaner should be used to absorb the water vapor in the splicing gap of the soaked wooden floor, or dry it with a hair dryer or cold air, but not hot air to avoid dry cracking and deformation caused by heating and drying. 2. For small areas of soaking water, do not pry up the laminate floor to dry, which can easily cause hard damage and cause serious consequences that cannot be restored. It is best to quickly remove the floor to expose the expansion joints, which allow the moisture to be dissipated.

3. For large areas of soaking water, it is necessary to deal with it in time, try to keep the floor not deformed, pry up the floor as much as possible, use the weight generated by its stacking to prevent deformation, and pay attention to not being exposed to the sun, but also placed in a ventilated place to dry, and under normal circumstances, the solid wood floor with better quality can be used again. 4. For the water-soaked and warped floor, it is best to replace and reinstall it. 5. If a small area of water is found in time, the ground can be cleaned, the board can be pried up, and the wet floor can be dried and reinstalled; If the water inlet is slightly larger, not only can you pry up the board at the leakage, but also pay attention to the direction of the keel row to pry up the opposite board, so that the internal circulation air can take away the moisture.

6. Usually pay more attention to rainy days, remember to close the windows to prevent rain. At present, the floor wax mainly plays the role of cleaning and maintenance, and cannot be completely waterproof; There are also some floor protectors on the market, like a transparent coating, non-stick, non-slip, waterproof and scratch-resistant, which lasts longer than floor wax, saving you the trouble of changing shoes at home.

The floor was blistered, and there was no way to repair it, so the floor had to be replaced.

If the water accumulation is small, you can use a dry cloth to dry the moisture on the floor and use a hair dryer to dry the moisture in the crevices of the floor. Finally, use a heavy object to press the soaked area of the floor to return to normal; If the floor is severely soaked in water, you can only pry the floor up, put it in a ventilated place to dry, and then re-lay it; However, if the floor has been soaked in water and deformed, the floor can only be partially replaced.