-
Anonymous users2024-01-24It's a tile, the sun can't give yellow, it should be affected by the water quality. It can be treated with a polishing machine, and the rest is acid, but it will damage the gloss of the surface.
-
Anonymous users2024-01-23Treatment methods for yellowing tiles caused by careless use:
1) Those with light color and small polluted surface can be soaked with 30% concentration of oxalic acid liquid.
2) Those with serious pollution should be soaked in hydrogen peroxide (H202). It has been proved in practice that the general contaminated building materials can be effective after 12 24 hours, and then rinsed with water. The faded tiles are oxidized by a strong oxidant, which will not damage the luster of the building materials.
Tens of thousands of contaminated white tiles have been cleaned to achieve satisfactory results. This method has low investment, simple process, and is non-toxic to the operator's body (open-air operation).
Hello! The bathroom is damp and easy to breed germs.
Guidance: You can buy some toilet detergent and the like, such as Mr. Vermeer, the effect is quite good. In addition, it should be noted that the bathroom should be thoroughly cleaned once a month or every two weeks, and the ventilation fan should be turned on for ventilation, and it will be much better. >>>More
Wall tiles refer to porcelain tiles. Porcelain tiles in the bathroom should not be attached to the floor. The bricks on the ground can be attached to the wall after processing, but the porcelain tiles cannot be attached to the ground.
It depends on the size of the bathroom. Generally speaking, the waistline can effectively prevent the color difference of the tile. The production time of ceramic tiles is different, and the color will be different. >>>More
The kitchen is a long-term damp and oily place, and the bathroom is also a long-term damp environment, and there is often water. The wall tiles in Rongwangli are 360-degree glazed, fully anti-fouling, completely impermeable and impermeable. After a few years of use of kitchen bricks, squeeze some dish soap on a wet towel, gently wipe the wall, wipe the larger oil spots with a cleaning ball, and then use a wet towel to clean them, and the brick surface is the same as new. >>>More
24 hours is enough, of course you have time to test it a little more, and you can do it for another day. More than that makes no sense.