Whether my entrance buttress is all entered into the area inside the sleeve

Updated on Entrance door 2024-10-05
2 answers
  1. Anonymous users2024-01-24

    The area inside the suite is calculated according to the axis of the outer wall of the house. The area of the entrance wall should generally be calculated according to 1 2, or calculated according to the axis of the door stack.

  2. Anonymous users2024-01-23

    I'm sorry I didn't know that COPY gave it to you.

    The built-up area of the commercial house is the exclusive area of the commercial house. It consists of three parts. The first is the usable area of the commercial house, the second is the wall area of the commercial house, and the third is the balcony area.

    The usable area of commercial housing.

    It includes the sum of the interior area of each room, such as bedroom, living room, hallway, kitchen, bathroom, storeroom, wall cabinet, etc. The thickness of the plastering of the interior walls is included in the usable area, and the indoor stairs in the duplex house are included in the usable area of the household.

    The wall area of the commercial house.

    In a commercial house, there are two kinds of public walls and non-public walls. Common walls refer to the partition walls between adjacent households and between households and stairways (including gables); Non-common wall refers to the partition wall between rooms in a commercial house. Horizontal area of the wall of the common wall:

    For the common wall area between households, the area is one half, and for other common walls, the area should be divided into the inner part of the suite and the common part. The interior of the suite is controlled by half the thickness of the partition wall between households. For example, the partition wall between households is 24 cm (commonly known as 24 walls), and each household occupies 12 cm.

    Then the division of the partition wall and external wall (including the gable) between the household and the common staircase walkway is 12 cm included in the area of the suite, and the rest is included in the common area. In the actual calculation, the area of the interior of the suite and the area of the wall in the suite are combined.

    Balcony area. The balcony area is generally calculated according to the size of the balcony perimeter protruding from the wall. Balconies are enclosed and unenclosed, with enclosed balconies counting the full area and unenclosed balconies counting half area. Whether the balcony is enclosed or not is subject to the architectural design approved by the plan.

Related questions
2 answers2024-10-05

Looking at the bold line on the diagram, it should be a load-bearing wall. The separation of dry and wet in the bathroom may also be a shear wall, if it is, it must not be removed, but if it must be removed, the wall stucco layer can be disassembled, and if the masonry is a hollow brick or aerated block, it can be removed. >>>More

2 answers2024-10-05

Based on the center point of the house, the fish tank can be placed in the south, west, and northeast directions of the house, and other directions are avoided. >>>More

2 answers2024-10-05

The guest room is better on the second floor, and I personally think it's better.

1 answers2024-10-05

1 In all traditional feng shui books, there is the following description of the hedging of the two doors: "The two families cannot be opposed, and the master and the family must retreat; When you open the door, you can't rush to each other, and there will be a murderer; The two are opposite to each other, and their tongues are bad luck." These views were justified in the old days, because the two gates were relatively close to each other, the frequent movement between neighbors, and the competition between the two families for common space could easily lead to the escalation of the conflict between the two sides, and the privacy between each other was leaked, making it difficult to create a quiet and peaceful living environment. >>>More