How do more expensive flush toilets drain water?

Updated on Toilet 2024-10-02
2 answers
  1. Anonymous users2024-01-24

    The main thing is the water pressure in the tank, which is generally a float, but a good toilet is an operating stem, and it is also connected to a metal hydraulic, so that the pressure is greater, and the problem you said above will be solved. My answer is one-sided, and I am saying that it is not comprehensive based on the fact that I am in my family.

  2. Anonymous users2024-01-23

    There are two main types of toilets: first, they can be divided into conjoined and split.

    Then according to the flushing method, it is divided into: direct flush type, rotary siphon type, vortex siphon type, and jet siphon type.

    Flush toilets are louder and are now largely obsolete. It is recommended to use a jet siphon type, which not only reduces noise, but also increases the flushing effect.

Related questions
2 answers2024-10-02

The principle of the flush toilet is mainly the siphon principle, and the schematic diagram of the flush toilet is also based on the siphon principle. The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More

1 answers2024-10-02

I don't know where you live, how to say it, the price is a little worse in different regions, tell you the approximate purchase price, the most inferior Henan out of the hundred hanging zero, Tangshan small factory is not much more expensive, a little better two or three hundred yuan can be about the same, porcelain enamel is better. The important thing is that the accessories and covers should be original, and Xiamen is good. Of course, the brand is good, but it's not worth the money. >>>More

3 answers2024-10-02

Generally, the phenomenon that the water has been flowing non-stop after flushing is the rubber plug cover of the outlet or the mouth has scale, you open the water tank cover, and then find the outlet that is the outlet where the water from the water tank flows to the toilet, and check the rubber cover on it to see if there is scale or wear. Generally, it is because of the poor sealing that it causes long-term running water.

4 answers2024-10-02

I believe everyone has encountered a blocked toilet, and it can also be said to be a more common thing in lifeNot only does it directly affect normal life, but it puts us in an awkward position? In fact, after the toilet is blocked, you may not immediately turn to a professional toilet company, you can try it yourself, so what are the methods of flushing the toilet? >>>More

1 answers2024-10-02

The price of the flush toilet depends on what you choose, and the flushing method has siphon and straight flush. Porcelain and porcelain are also different, there are high-temperature porcelain and low-temperature porcelain, generally high-temperature is better, like the toilet bowl of the titan is generally fired at constant temperature, such a toilet is bright, the glaze is delicate, and the sewage effect is good.