-
Anonymous users2024-01-24Good Luck Flooring tells you how to deal with special stains and damage on common wood floors:
Smudges and damage Treatment.
Neutral detergents such as asphalt, rubber, oil, shoe polish, chocolate (it is recommended to use a strong detergent dedicated to Lutex).
Neutral detergents such as chalk, crayons and lipsticks (Lutex-specific cleaners are recommended) Waxes, chewing gum, paints Wrap ice cubes in plastic film and place them on the stain and carefully scrape them off.
If it can't be removed, use a strong detergent to remove it.
High heels, table legs and other heavy objects pressure depression with a towel dipped in hot water about 60-70 times several times to recover;
Cork bricks are used, and other wooden floors can not be restored if they are dented) Good floors are maintained, all floors are cleaned after cleaning, and it is best to use the maintenance products specified by the manufacturer for regular maintenance at an interval of 3-6 months, so that the gloss of the floor surface layer can be improved, and the service life of the floor can also be extended!
Note: Do not sandpaper, wax or paint the floor floor;
Do not use thinner materials such as acetone to clean the floor;
Do not hit with heavy or hard objects or cut with sharp objects.
Sandpaper sanding off the black part, then putty repair, add pigment similar to the floor color in the putty, and then polish it after drying, and then brush the varnish.
How to deal with the soaking of hardwood flooring laminate flooring. >>>More
It is still necessary to be rational, first look at the quality and then look at the style. Multi-layer hardwood flooring is made of multiple layers of special plywood as the base material, and wood chips made of precious tree species are laminated into panels. Generally high-quality floor paint surface is full and smooth, rich and natural, the paint film is transparent, the texture in the surface plate is clear and realistic, and the back plate and the surrounding sealing are also very good, so it can effectively reduce the absorption of water vapor in the surrounding environment on the back of the floor and around it, and effectively prevent the floor from warping and deforming. >>>More
1. If the gap between the floor and the floor is too large, there is no way to get it but to disassemble and reinstall it (generally there are teeth between the floor and the floor, which can be bitten, and this kind of gap almost does not exist, and the floor can be taken out directly.) Not such a stupid floorer... >>>More
Has the floor swelled? If it is inflated, what is said below is useless! The following is only to be operated immediately after the water is injected. >>>More