What should I do if the solid wood floor at home is soaked in water?

How to deal with the soaking of hardwood flooring laminate flooring.

If the solid wood floor composite floor in your home is bubbling, the joints are warped, and the baseboard is deformed and bulging, it is that your solid wood floor is soaked in water, and what you need to do is to rescue it quickly.

Step 1: Find and cut off the water source in time. The surface water on the parquet is blotted out in the shortest possible time.

Step 2: If it is a small area of soaking water, you should quickly remove the baseboard of the solid wood floor composite floor, expose the expansion joint, and dissipate the water vapor by the expansion joint, according to the size of the seepage water, it usually takes about three to ten days to dry. It is recommended not to pry the laminate flooring to dry, which is easy to cause hard damage to the laminate flooring, which is likely to cause serious consequences that cannot be restored.

Part 3: You can also use a vacuum cleaner to absorb water vapor in the splicing gap of the water-soaked solid wood floor composite floor, or take a hair dryer to dry it with cold air, but do not use hot air to blow it to prevent the surface of the solid wood floor composite floor from drying due to heat and drying.

Step 4: If it is a large area of water, you should notify the after-sales service office of the solid wood floor composite floor in time, and try to keep the solid wood floor composite floor not deformed under the condition that the solid wood floor composite floor is carefully pried up, and placed it to dry according to the "well" shape, and use the weight generated by its stacking to prevent the occurrence of deformation, and at the same time pay attention to not being exposed to the sun, it should be placed in a ventilated place to dry, and under normal circumstances, the solid wood floor with better quality can be used again.

Step 5: It is best to replace the solid wood floor laminate that has been soaked in water and warped and deformed, and check the inventory and batch of the solid wood floor laminate floor that needs to be replaced before replacement, because only the solid wood floor parquet with the original solid wood floor parquet design and specifications can be used, otherwise it cannot be repaired. It is not recommended to plane the arched part and then repaint the treatment method, because after the arching part is planed, repainting will lead to inconsistency with other board colors, and the thickness of the whole solid wood floor composite floor is uneven, the force is different, and it is easy to appear pits.

After all, rescue after the fact is passive, and it is the best choice to take precautions. Usually, pay more attention to the window not to open wide to prevent rain; Always check the air conditioner, plumbing pipes, and washing machine for water leaks.

Guangzhou Tongeju floor maintenance company, I hope it will be helpful to you.

First, after all, post-rescue is passive, and taking precautions is the best choice. Usually, pay more attention to the window not to open wide to prevent rain; When you go out of the bath and enter the bedroom, you have to change your shoes; Always check the air conditioner, plumbing pipes, and washing machine for water leaks. At present, the floor wax mainly plays the role of cleaning and maintenance, can not be waterproof soaking, the best preventive measure for soaking wood floor water is to use floor protection film, such as the floor protection film on the market, it has a long service life, no damage to the floor, and also saves the trouble of changing shoes at home.

2. If the wooden floor is soaked in water, the surface water on the wooden floor should be sucked dry in the shortest possible time. At the same time, take a vacuum cleaner to absorb water vapor in the splicing gap of the soaked wood floor, or take a hair dryer to dry it with cold air, but never use hot air to blow it to prevent the surface from drying and drying the surface.

Third, the wooden floor that has been soaked in water warped and deformed, it is best to replace, it is not recommended to plane the arched part, and then repaint the treatment method, because after the arch part is planed, repainting will lead to inconsistency with other board colors, and the thickness of the whole board is uneven, the force is different, and it is easy to appear pits.

Fourth, if it is a large area of soaking water, you should notify the after-sales service office of the wooden floor in time, and try to keep the wooden floor not deformed under the condition of carefully priing the wooden floor, according to the "well" shape superimposed in the ventilation place to dry, with the weight generated by its stacking to prevent the occurrence of deformation, pay attention not to be exposed to the sun, under normal circumstances, for the quality of the solid wood floor can be used again.

5. If it is a small area soaked in water, it is recommended not to pry up the floor to dry, which is easy to cause hard damage to the floor, and it is likely to cause serious consequences that cannot be restored. It is best to quickly remove the baseboard of the floor to expose the expansion joints, which usually take about three to ten days to dry out, depending on the amount of seepage.

1: First of all.

To blot the water on the floor. At the same time, you can use a water absorber to absorb water vapor in the splicing gap of the soaked floor, or use a hair dryer to dry it with cold air.

2: Second. If the joint is only a small area of warping, you can use a weight to press on it, and after a while, the wooden floor will return to normal on its own. If, after a period of time, the joints have to bulge, but they are too far from the original shape of the previous floor, you can try waxing the floor, and the soaked floor after waxing will basically be almost the same as the original. If the color and shape of the floor are still very different from the original state after waxing, then only a partial replacement of the floor is required.

3: Again. What should I do if the solid wood floor is soaked in water? In the case of keeping the floor as deformed as possible, the floor is carefully pried up, stacked in a ventilated place according to the tic-tac-toe shape, and the weight generated by its stacking is used to prevent deformation. If it is laminate flooring, quickly remove the baseboard of the floor, expose the expansion joint, rely on the expansion joint to dissipate the water vapor, according to the size of the seepage water, it usually takes about three to ten days to dry, and the general laminate floor is likely to be used again after soaking in water in a large area.

(1) Large area of soaking water: contact the manufacturer in time when cleaning up the stagnant water on site.

If the wood floor is soaked in water in a large area for some reason, and the amount of water is large, the wood floor manufacturer or its customer service should be consulted in time while cleaning the site, because different wood floors, the treatment method will not be the same. Try to completely remove the wooden floor in a short period of time, because in addition to the bathroom, the kitchen, living room, and bedroom are generally not waterproof, so the water on the ground needs to be cleaned as soon as possible to avoid leakage downstairs and cause greater losses.

2) Local soaking: After cleaning, see if there is any change in the soaked wooden floor.

If it is partially soaked, observe whether the wooden floor has changed significantly after cleaning for a period of time, and if there is a warped edge, you can contact the paving wood floor worker for partial replacement, and calculate the area of the wooden floor required for maintenance. If there is a surplus of wooden flooring at the time of paving, workers can be asked to use this wooden floor to pave. If there is no left, you need to check the batch or model of the wood floor that needs to be replaced before paving, because only the original wood floor with the same color and specification can be used, otherwise it will not be installed and the color will be different.

Also, be sure to wait until the ground is dry before paving.

Algar flooring for you to answer, if it is a solid wood floor, try to keep the floor not deformed under the condition of carefully prie up, according to the tic-tac-toe superposition in the ventilation to dry, with the weight generated by its stacking to prevent the occurrence of deformation, in general, for better quality solid wood flooring can be used again.

1. The surface moisture should be wiped off in time, the vacuum cleaner can be used to absorb the moisture at the splicing gap of the floor, and the cold air of the electric hair dryer should be used to dry the gap of the floor, but do not use hot air to blow to prevent the surface of the floor from drying due to heating and drying, and then ventilate and dry. In addition, the dehumidifying function of the air conditioner can be used to remove excess water.

2. Generally, high-quality wood flooring will have a self-repair function, and there will be no problem if it is treated in time after soaking in water. For a large area of solid wood flooring soaked in water, the owner should notify the merchant in time, ask a professional to remove the wooden floor, and the demolished floor should be placed in a ventilated place to dry, not exposed to the sun to prevent bursting. If it is partially soaked in water, observe whether there is any obvious change in the floor after cleaning for a period of time, and if there is a warped edge, it can be partially replaced.

3. However, if the solid wood floor is soaked in water for a long time and the arching and cracking occurs, the solid wood on the surface of the parquet is layered and wrinkled and deformed, and the laminate floor becomes thicker and layered after being soaked, and the cost of replacing the floor and related maintenance costs should be borne by the owner.

1. On-site inspection.

Sports wood floor maintenance staff, or stadium staff, when they find that the sports wood floor is soaked in water after work, don't panic first, be calm. Inspect the soaking site at the first time to eliminate potential safety hazards, such as whether there are wires, electrical appliances, flammable and explosive materials on the soaking floor, etc.

Then according to the degree of water immersion of the sports wood floor, a solution is formulated.

2. Soak in water lightly.

If the sports wood floor is lightly soaked, the lightly soaked and damp floor can be wiped dry and ventilated. If necessary, disassemble the sports wood floor to observe whether there is water on the ground and observe whether the floor is obviously deformed. If so, it needs to be removed and dried, and reinstalled.

3. Heavy soaking.

Sports wood flooring that is seriously damp or soaked in water for 30 minutes will be deformed, expanded, and lost its luster. Such sports wood flooring is basically scrapped and should be replaced, and attention should be paid to removing the moisture under the floor and drying it.

4. Precautions.

After the sports wood floor is soaked in water, it is important to pay attention to the fact that it cannot be blown by hair dryer, exposed to sunlight, or dried, which will accelerate the serious deformation and damage to the surface of the sports wood floor of the basketball hall.