-
Anonymous users2024-01-24Landlord; First of all, if you make lacquer for wood products, the primer is very important and heavy, you can do this, first; The special primer of the wooden should be brushed evenly, and it can be brushed once every 30 minutes (the floor mainly increases the thickness of the primer repeatedly according to what kind of feel you want it to achieve) Second: After the primer is completely dried the next day, the 800 sandpaper is sanded to a smooth and flat (there is a feeling of flesh to the touch) Third: clean up, clean up the pollutants on the wooden handicrafts, and you can get the color you need, (it is best to find a place with little dust pollution) Fourth:
Spray topcoat (varnish), spray more evenly, spray it on both sides, every 6 minutes.
-
Anonymous users2024-01-23Three primers, colored, clear topcoats.
20,000, it can be matched well.
The key to the lens... >>>More
If all the preparations are done, spray 20 square meters for an hour, but three times a day, it is not realistic, generally spray twice, once in the morning, once in the afternoon, 5 kg is almost twice sprayed, three times it is estimated that you need to open a bucket, which also depends on the thickness or thinness of the spray.
The toilet can not be changed to the squatting pit, the main thing is that you have to change the floor [at the upper end of the squatting pit to be 40cm higher than the original floor], and the squatting pit to the toilet 20cm, because if you want to be 40cm high, plus your upstairs drainage pipe 30cm-40cm, the height of the bathroom is about 180cm,
Automobile painting process:
1. Sheet metal calibration is to do the preliminary shaping work for automobile sheet metal painting. >>>More
Product Description:
1> Material Construction: Leather, cotton between leather and foam, wooden frame. >>>More