-
Anonymous users2024-01-24One is lacquer, which is the most expensive. One kind of wood paint, please spray the master, and the other is baking paint.
-
Anonymous users2024-01-23The key is sanding, and paint is the little thing.
-
Anonymous users2024-01-22Landlord; First of all, if you make lacquer for wood products, the primer is very important and heavy, you can do this, first; The special primer of the wooden should be brushed evenly, and it can be brushed once every 30 minutes (the floor mainly increases the thickness of the primer repeatedly according to what kind of feel you want it to achieve) Second: After the primer is completely dried the next day, the 800 sandpaper is sanded to a smooth and flat (there is a feeling of flesh to the touch) Third: clean up, clean up the pollutants on the wooden handicrafts, and you can get the color you need, (it is best to find a place with little dust pollution) Fourth:
Spray topcoat (varnish), spray more evenly, spray it on both sides, every 6 minutes.
Jiangsu Shuimu Essence Flooring Emerging Solid Wood Flooring Enterprises There are not many quality evaluations...
Clear water paint can be used to show the wood grain.
The essence of clear water paint is to see through the texture and pores of the veneer. Use the pigment to mix the desired color as the base color, and finish the varnish to achieve the desired effect. The color and texture of the panel should be selected when decorating with clear water paint, but in the construction process, it is necessary to pay attention to the protection of the material when entering the site, that is, to brush the primer, in order to better protect the furniture and color. >>>More
Baoshan Paint Guidance:
Thinner, banana water, rosin, alcohol, gasoline tried-and-tested; You can also try hair dryers, lotion creams, and toilet water home remedies. Specific: >>>More
Mahogany furniture should be scraped putty first, and then polished with sand skin after drying, you can paint, if the general furniture, first do a good job of polishing, is to do a good job of no bright light on the surface, primer brush several times, with good quality paint. The effect of white paint spraying is good, and other paint spraying can not produce the effect.
The paint on the solid wood floor is almost the same as the paint used for decoration now, you can polish the whole piece of the floor plate and then re-paint, the current solid wood floor is paint-free board, if it is an old-fashioned floor, it should be paved first and then polished and then painted, the water and oiliness are different in the use of the part, and the properties can be used in the ground or oily is better.