-
Anonymous users2024-01-24The first look at whether the pipe well valve is fully opened, the second is to see whether the water separator and the ball valve are fully opened, the third water separator and exhaust may not circulate well, the fourth is to see the high water supply temperature of the community, not to see the neighbor's heat, and the fifth is recommended that you clean and clean the floor heating and find a professional after-sales HVAC wonder.
Causes and solutions for underfloor heating not to heat.
First-time use or long-term inactivity. >>>More
Nowadays, floor heating is generally supplied in separate ways, please check the heating pipes in the bedroom. See how about or backwater.
If you use it for more than three years, you should clean the floor heating, because your home is at the bottom of the system, the impurities in the system will naturally sink into your radiators and pipes, so that the operating resistance of the system increases, and the heating capacity is naturally reduced. Otherwise, why do you put water and the radiator gets hot?
There should be a water distribution tank for floor heating, check whether all the branch valves are open at the water distribution tank, close the water supply valve of the water distribution tank, open the exhaust valve at the top of the water supply distribution tank, empty the air inside, when there is water flowing out with the exhaust valve, open the water supply valve, close the exhaust valve, if the other rooms are not hot, all the valves have been opened, then the already heated space is in the water distribution tank, close the water supply (or return) valve a little smaller, and the other rooms should be hot---
The new installation has this problem, since these two masters said so, then look at the explanation, it is the problem of the toilet! Toilets are divided into several types according to the way they are flushed 1Flush toilets: >>>More