Why is the toilet not draining smoothly after it is sealed?

Summary. Hello dear, glad to answer for you! The main reason is that the connected sealing ring is not installed properly, resulting in water leakage in the toilet.

Excessive pursuit of the miniaturization of tank accessories causes the float to be buoyant enough, or the float rod gap is large, resulting in friction with the tank wall, affecting the float and causing water leakage. The selection of inferior materials, without a filter, impurities blocked the sealing ring hole, resulting in the inlet valve could not be closed, and the seal failed. Dear, the above is mine, I hope these contents are helpful to you!

Hello dear, glad to answer for you! The main reason for the merger is that the connected sealing ring is not properly installed, resulting in the leakage of the toilet to hide the water. Excessive pursuit of the miniaturization of tank accessories causes the float to be buoyant enough, or the float rod gap is large, resulting in friction with the tank wall, affecting the float and causing water leakage.

The selection of inferior materials and the lack of filters have caused impurities to block the holes of the sealing ring, resulting in the failure of the water inlet valve and the failure of the seal. Dear, the above is mine, I hope these contents are helpful to you!

An Hualan is slow to enter the water, and it is normal to go into the water without worrying, what is going on?

After installing Hualan, the toilet drain slows down, which may be caused by the blockage of the connection part between Naitan and Hua Luolan, the angle of Hua Lan is not appropriate, and the channel diameter of Hua Luolan is too small. However, if the water is not installed, it may be that when the water is not installed, the pipeline is unblocked and there is no blockage. In order to solve the problem of slow toilet drainage, it is necessary to find out the specific cause of the problem, such as the toilet, sewer pipe or Hua Luolan, etc., and carry out Yuqiao investigation one by one to find out and solve the problem.

Chang Xutong. After the toilet is tightly closed, the drain will be slow, and the drain will be fast after opening the side of the horse to take in the air, what is going on?

When the toilet is closed, the drain may be slow because the toilet drain is blocked or the pipe is bent, causing the water to flow slowly. After opening the inlet bar on the side of the toilet, the air flow in the pipe can be increased, so that the water flow through the pipe is smoother, so as to achieve the simple grinding effect of speeding up the drainage.

The water inside the S-bend inside the toilet bowl forms a water seal. There is also an S-bend at the bottom of the drain standpipe, where the water also forms a water seal. The function of the water seal is to block the odor.

A confined space is formed between the two water seals. When the water in the toilet goes down, because there is no air passage in the confined space, the air in the confined space has a certain resistance to the water flow, so the water is not smooth, especially the water volume of the water-saving toilet is relatively small, and the water is even more unsmooth.

For example, when pouring water into a bottle, if the water flow blocks the mouth of the bottle, the air in the bottle has no unobstructed outlet, which creates a resistance to the water flow, and the water is not easy to pour into the bottle.

When a gap is opened at the bottom of the toilet, there is no longer a confined space between the two water seals, the air no longer has resistance to the water flow, and the air inside and outside the toilet forms a pressure difference, so the toilet drain is smooth.

Is it not in the installation and the drainage pipe sealing mud is not sealed, air leakage, smooth drainage, after the glass glue, there is no air circulation, atmospheric pressure makes the drainage slower, I don't know if the slowdown has affected the effect of drainage.

It is recommended to check it out.

It may be that the sewer pipe does not have a vent!