-
Anonymous users2024-01-241. All you can use the glass glue that is in contact with the toilet and the ground with iron nails or other tools to pass through an exhaust hole, and the way your toilet is drained must be siphoning.
-
Anonymous users2024-01-23Won't a hole leak, lie?
-
Anonymous users2024-01-22There are alkali blocks in it, which are formed after long-term use, and if the sewer pipe is PVC, you can buy a few bottles of hydrochloric acid and soak it for a few hours.
-
Anonymous users2024-01-21Do you have a shifter at home? It may be blocked, and if you use a shifter, it is likely to be blocked.
Either there is a problem with the contact between the toilet and the pit
The solution to the toilet drain is not smooth as follows: >>>More
The toilet can be said to be a kind of sanitary ware in each of our families, things will have some problems after a long time, the toilet at home is always not smooth, often embarrassing: the water in the toilet tank plus a spare bucket of water poured into the toilet to flush the sewage out. So what to do if the toilet drain is not smooth, and what are the reasons for the toilet drainage? >>>More
Hello, this is generally caused by the fact that the toilet tank is caused by a lot of limescale, that is to say, the drainage of the sewer pipe is insufficient, you can remove it and clean it up, and it can be solved.
Go to the building materials market, spend 10 yuan to buy a pipe dredger, and it can be solved in a few minutes:
In addition to blockage, this kind of problem basically appears on the siphon toilet, the siphon principle is not detailed here, if the S bend behind the toilet, or the sealing ring (flange) of the bottom sewage outlet is aging and leaking, the siphon will be greatly discounted, and there will be a problem of unsmoothness, if the blockage is eliminated, you have to check the problem of air leakage! That's right.