-
Anonymous users2024-01-24First, put the large end of the plastic screw into the guide groove on the toilet lid, and then insert the threaded end into the ceramic hole of the toilet bowl and tighten it with a nut.
-
Anonymous users2024-01-23Snap into the card slot at the bottom of the lid, then go through the hole in the front of the tank and tighten it.
-
Anonymous users2024-01-22Twist it in reverse (counterclockwise) a few times first, and then tighten it clockwise after entering the buckle.
-
Anonymous users2024-01-21Just buy a new one.
-
Anonymous users2024-01-20If you have one, change it, and if you don't have it, use the drink bottle cap to make an eye instead.
-
Anonymous users2024-01-19There is a plastic snail bubbling up at the bottom of the toilet.
-
Anonymous users2024-01-18The sanitary ware store has new fixing plastic screws, just replace them with new ones! It is also available online.
-
Anonymous users2024-01-17Replace with a new one or glue.
It's going to be changed together. Lift up the cushion and cover, the position of the bolt is just below the contact between the cushion and the pit, and you can touch it with your hand, and there is a plastic bolt on one side, which is very easy to replace.
It is to match the seat of the toilet, and the shape is different. If you look at the price alone. It's not worth a few bucks, but this one hasn't been purchased separately yet. >>>More
1.Vinegar descaling method: pour the mixture of vinegar and water into the toilet, and after soaking for half a day, the scale will be brushed off. >>>More
That funnel-shaped thing, is to lead the toilet dirt into the sewer, to prevent the sewage leakage, it must be installed, otherwise it is cutting corners, the owner finds that you want to rework, but also affect your reputation!
Smear some mortar under the toilet bowl and put the toilet bowl on top!! Set the level right, and then apply glass glue around it, and that's it.