-
Anonymous users2024-01-24You can choose a good surface-mounted shower to install, but the centering of the reserved hole must be guaranteed to be 15LM, otherwise it will not be connected. You can also connect the reserved head to the elbow and connect the shower with a hose, which is not very beautiful. Then there is the destructive planing of tiles, replacing the pipe fittings with bricks.
-
Anonymous users2024-01-23No problem, you can install the shower normally after buying the inner wire to the outer wire.
If there is no shower hole in the bathroom decoration, then the better way is to remove the plaster and re-construct, although it is more troublesome, but it will be a more satisfactory way.
What does it matter if the bathroom root shower is loose without decoration? >>>More
Basically, if the bathroom is large enough, it is necessary to reserve the water outlet line of the bathtub and shower at the same time. >>>More
The water inlet pipe is about 800-1000mm above the ground.
The third port has nothing to do with the shower, it is to install a small faucet or something, or use it as a washing machine faucet.