-
Anonymous users2024-01-24The discoloration of wood is mainly caused by the absorption of ultraviolet light, and the degree of discoloration of the sapwood of the wood and the heartwood after absorbing ultraviolet light is different, which will lead to a certain color difference in the paved floor. The surface layer of multi-layer parquet is natural wood, which has the natural properties of wood, and the photodiscoloration produced is a normal phenomenon, not a product quality problem. The discoloration response of most woods is from light to dark, and only a few woods have dark to light, and the discoloration is basically the same on the same floor.
Therefore, the paved floor should not be exposed to the sun for a long time, and the necessary shading measures should be taken appropriately.
The flatness of the ground is not good, and it is most likely to be caused by no screeding! The possibility of being caused by the paving process is very small.
Parquet is widely used in modern home decoration, but the quality of floor installation will directly affect the beauty and life of the floor. Now let's take a look at the installation method of parquet! >>>More
The mat treasure used is just paved, right?!
There is no leveling with other materials, only cushions, it is impossible to level. I don't know how you made an agreement with them. If installation is included, you have to find them. Just a little, the floor is unloaded and reinstalled, and it will not be as tight as the first installation. >>>More
First pop up the horizontal line from the surrounding of the house, then turn down to determine the height of the leveling layer, and then pull the line to make the positioning height of the ash cake, and then you can do the leveling layer. I hope my answer can help you.
Laminate flooring does not require a keel. Directly on the ground over the cement mortar. Spread moisture-proof paper. >>>More