What is a carpentry ceiling

Carpentry is a more important type of work in home decoration, and the construction period is relatively long. The main work of decoration carpentry includes: ceiling skeleton, design and production of wooden doors and windows, the most important is the design and installation of shuttle doors and shuttle windows, the installation of decorative door sets, components and wooden floors, the production of wooden cabinet furniture, the production of TV background walls, etc.

Browse the drawings and fully understand the drawing shape. Plane the wood and brush it with fire-retardant paint. Pop up the ceiling horizon on the wall, and fix a few longitudinal keels on the top as needed.

To make the keel frame, it can be nailed on the ground first, and the special-shaped roof is modeled with blockboards. The wooden keel should be fixed with a boom, and attention should be paid to the water and verticality. Reserve the position of the bottom plate or lamp trough of the lamp holder, connect the wire by an electrician, and leave the wire end, and fix the cut gypsum board with self-tapping nails.

Use the horizontal tube to find the horizontal point, and use the ink fountain to play the horizontal line along the horizontal point.

Light steel keel wooden keel for the side dragon, the position of the light trough is made of wooden keel or woodworking board, there is a wooden production place must be brushed with fireproof coating, the keel is at least more than 50, the spacing of 30 cm is good, the spacing of the bars is 60 0 cm is good, the gypsum board and the board should be artificially reserved between the five mm gap, the gypsum board surface self-tapping screw is inverted one mm and do anti-embroidery treatment, to be smooth and firm, and the special-shaped line should be smooth.

Wooden keel at least three or four above, the spacing of three 0 centimeters is good, the spacing of the suspension bar is six 0 0 centimeters is good, the suspension bar is strictly forbidden to directly use the wooden wedge nail to the top, brush the strict fireproof coating until the color of the wooden keel can not be seen, the keel is covered with 1 layer of full foot willow eucalyptus core 9 centimeters board and then on the gypsum board, between the gypsum board and the board to artificially reserve five millimeters of space, gypsum board surface self-tapping screws inverted one millimeter and do anti-embroidery treatment, to be smooth and firm, special-shaped to achieve smooth lines.

Carpentry ceiling is made of various shapes with wooden keel and gypsum board on the top of the house to meet people's aesthetics and make the house more beautiful

Ceiling is a kind of carpentry work, woodworking includes making furniture, ceilings, and other wood products.

The main material of the ceiling is different, and the workmanship is almost the same.

Carpentry ceiling refers to the top decoration of the living environment of the house after processing with wood.

Wooden keel ceilings are commonly used in home decoration, and the general process is like this:

1. Read the drawings and fully understand the drawing modeling.

2. Plane the wood and brush it with fireproof coating.

3, pop up the ceiling horizontal line on the wall, and according to the need, fix a few longitudinal keels on the top 4, make the keel frame, can be nailed on the ground first, special-shaped top should be made of blockboard model 5, use the boom to fix the wooden keel, and pay attention to adjust the horizontal and vertical degree 6, reserve the lamp holder bottom plate or lamp trough position.

7. Connect the wires by the electrician and leave the wire ends.

8. Fix the cut gypsum board with self-tapping nails.