My house has a floor height of 4 2, and I want to make a partition above the second bedroom as a gue

Updated on Second bedroom 2024-09-16
2 answers
  1. Anonymous users2024-01-24

    It is recommended to reduce the I-beam spacing to 600-800mm, and lay 3cm wooden boards on the meter spacing, the load is too small, and the concentrated load is relatively large when placing furniture, and there are potential safety hazards; It's best to get a designer to help you do the math.

  2. Anonymous users2024-01-23

    No. 10 I-beam and 30mm planks problem, it is safer to reduce the I-beam spacing to about 700mm

Related questions
4 answers2024-09-16

It can be, but you don't have enough space, the wardrobe must be 600, and it's a double bed, so I suggest you make a sliding door wardrobe, the end of the bed is facing the window, I suggest that the layout is good like this, you refer to it.

4 answers2024-09-16

To get a router or switch,Personally, I recommend using a router so that if you add a computer in the future, you are not afraid,If you use a switch in the future, if there are more computers in the future, you will use dial-up Internet access to multiple units, it seems that there will be a conflict, only 2 or 3 can be on,Use a router without this concern。

4 answers2024-09-16

When you decorate the house, install a wash basin in the second bedroom with water, of course, it is very convenient, very good, if you can, find a decorator to design well, it is the best.

2 answers2024-09-16

First of all, you need a mat and a pole of the right height for leg pressing.

2 answers2024-09-16

The level signal sent by the current cable TV operator into the user end is generally about 75dB What is it like in your house I don't know but I think it won't be too long As long as the line is not damaged, you can pull up to 30 meters of the line indoors, generally about 10-15 meters, such attenuation is very small, generally about 2db As long as you don't connect in series, use the distributor to distribute it normally, indoors, generally do not need to consider the line attenuation, very small, see which terminal is close to your second bedroom, just take the signal source from there.