-
Anonymous users2024-01-24Add up the two wall edges and multiply the height!
The wall edge size is the size of the wall edge at the maximum point from the corner of the wall to the arc and the point perpendicular to the wall edge.
This is how the DOHY shower room is calculated! ）
-
Anonymous users2024-01-23Generally, manufacturers multiply the height by two diagonals is its square number.
-
Anonymous users2024-01-22Arc length X high, arc length calculation to know the radian and R radius either directly measure the arc length is the easiest.
The area of the arc is calculated by subtracting the area of the triangle from the area of the sector. >>>More
Do you want to do it yourself? I think it's okay, the first floor is right, the manufacturer has a spot, the upper and lower parts should use curved guide rails, the glass used in the middle is tempered hot bending glass, and the towel rack inside is made of stainless steel, if you want to do it yourself, it will be very troublesome. If you order only a little bit of these things, it will be very expensive, but the price of the manufacturer's mass order will naturally be lower, so the market price must be cheaper than your own order, and do you know where to order?
Width Height = Area.
The water retaining stone is generally calculated separately, and the unit price per meter is the whole set of price = shower screen area The unit price of the shower room + the length of the water retaining stone The unit price of the water retaining stone is very easy to calculate. >>>More
The distance between the two ends of the front plane, and the distance from the wall to the outside of the partition position, you don't have to worry about the rest, the designer will naturally calculate according to the structure.
According to the overall area, it must not be calculated separately, otherwise the area may be different.