How modern toilet tanks work

Rely on the float to stop the water in the inlet valve; The drain is lifted by pressing the switch or the old-fashioned cable switch, so as to form a siphon to let the water flow out quickly, a large amount of water enters the toilet bowl beyond the toilet drain S bend height, and the drain forms a siphon, which quickly takes away the internal dirt, and after the water volume is reduced, a small amount of water is left to seal the S bend hole to prevent the drain from smelling out.

The principle of automatic flushing of toilets:

There is a float valve inside, as the water level in the tank rises, the buoyancy generated by the float increases, and when the water level rises to a predetermined value, the buoyancy generated by the float will be transmitted to the plug that discharges the water through a seesaw structure, and the plug can be automatically pulled up as long as the drain button is pressed. After the water is discharged, the plug automatically returns to its position under the action of the spring and enters the next round of water filling cycle. >>>More

For the introduction of the upper valve and lower parts of the toilet tank, the use method and operation principle are introduced, so as to facilitate better maintenance and replacement.

The polymer polymer material is used as a packing bag, instead of water, the feces are packed, sealed and dropped into the collection box for temporary storage, and then processed by the corresponding equipment. The series of actions used in the toilet can be manual, mechanical, or microcomputer-inductive.

The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More