The difference between Glodon ceiling calcium plastic board and gypsum board

Treatment method of gypsum board ceiling cracks:

Remove the loose plaster with a multifunctional knife. Turn the knife so that the notch is larger and the lines of the edges are clearer. Remove the plaster fragments and keep the wall around the notch structurally intact. Vacuum away loose plaster and dust. >>>More

Gypsum board is a material made of building gypsum as the main raw material. It is a kind of building material with light weight, high strength, thin thickness, convenient processing, sound insulation, heat insulation and fire resistance, etc., and is one of the new lightweight boards that are currently focused on development. Gypsum board has been widely used in the interior partition walls of various buildings such as residences, office buildings, shops, hotels and industrial plants, wall cladding panels (instead of wall plastering layers), ceilings, sound-absorbing panels, ground base panels and various decorative panels. >>>More

It will be useful to save this acceptance diagram later.

1. Latex paint finish; Gypsum board surface layer 2, full scraping 2 thick surface layer water-resistant putty leveling, panel joints pasted with caulking tape, scraping putty smoothing; 3. Brush two layers of polyurethane moisture-proof paint, one in the vertical and horizontal directions; 4. Paste the second layer of plate at a staggered seam; 5. The plate is fixed with self-tapping screws and keel, the middle distance is 200, the screw is 10 from the long side of the board edge, and the short side is 15 (the ceiling used for waiting hall and large space office should be added with finished expansion joints); 6. U-shaped light steel cladding cross brace keel CB60x27, spacing 1200, connected with secondary keel with hanging plug-in; 7. U-shaped light steel cladding secondary keel CB60x27, spacing 400, connected with the bearing keel with pendants; 8. U-shaped light steel cladding bearing keel CS60x27, spacing 1200, leveling with hangers and steel bar boom connection (the ceiling used for waiting hall and large space office is welded at the top of the bearing keel every 12 meters, and the main keel is welded horizontally on the top of the keel); 9, C8 steel bar boom, two-way spacing 1200, the upper part of the boom and the reserved steel bar lifting ring fixed 10, cast-in-place reinforced concrete slab bottom reserved %%10 steel lifting ring, two-way middle distance 1200.

A price of a ceiling with virtual light is just a light nest on the structure.