-
Anonymous users2024-01-24For the waterproofing of the bathroom, from the perspective of waterproof effect and construction convenience, it must be a cement-based waterproof coating.
Because for the toilet site, which is narrow, has many pipes through the wall, many corner positions, and the ground is easy to get wet, it is required to be non-toxic, harmless, and environmentally friendly; The waterproof effect should be strong, the price should be reasonable, etc., and the cement-based waterproof coating is the most suitable.
Cement-based waterproof coating slurry, that is, the name on the market is: general-purpose, flexible, K11, JS, GS waterproof coating paste, this kind of product is water-based coating, non-toxic, harmless and pollution-free, simple and fast construction, and cement substrate bonding, long service life, strong waterproof effect, moderate price and other significant characteristics. Choose brands with good quality and good reputation, such as:
Lei Bangshi, JCDecaux, Oriental Yuhong, etc.
Polypropylene is waterproof, not environmentally friendly enough, there are many construction procedures, and the bricks cannot be pasted on the wall and cannot be pasted on the wall.
Leibangshi - home waterproofing expert.
-
Anonymous users2024-01-23The best coating, polypropylene cloth is not suitable for a small area of waterproof layer, and polypropylene is generally not recommended for the bathroom, because the lap joint is not good and prone to water leakage. It is best to use waterproof coatings, polyurethane, JS, K11, permeable crystallization can be, it is best to find professionals for construction, and do 12 24 closed water test after construction to check whether it is qualified.
-
Anonymous users2024-01-22At present, the most suitable material for home waterproofing in the market, the new polymer cement-based waterproof slurry, which is composed of organic polymer liquid material and inorganic powder composite surface, integrates the advantages of high elasticity of organic materials and good durability of inorganic materials, and is opened into a high-strength and tough waterproof coating film after coating, which has the advantages of good waterproof performance, strong adhesion, aging resistance, green environmental protection, and convenient construction.
-
Anonymous users2024-01-21Seismic tested polypropylene is superior to waterproofing coatings.
-
Anonymous users2024-01-20Polypropylene is better, low cost, high environmental protection, reliable performance, no sand hole and missing brush.
It can be double-layered, lap more than 10cm. Bathroom 1800 2400Kitchen 300 600. Door opening up: 300 600
-
Anonymous users2024-01-19Of course, waterproof coatings are good, polyurethane, JS can be.
Try not to damage the original waterproof layer.
In the newly delivered building, the floors of toilets, bathrooms and kitchens are all waterproofed in accordance with the relevant specifications, and as long as the original waterproof layer is not damaged, there will generally be no leakage. But now the common problem is: the decoration will add some bathing facilities and a variety of water and water pipelines to rearrange or move, itself has destroyed the original waterproof layer, and did not repair or redo the waterproof construction in time, so it is very easy to leakage. >>>More
1. The cost of all specific bathroom waterproofing depends on the waterproof scheme you choose and the waterproof material you choose. >>>More
Clean the base surface first, and then rinse it with water, the cleaner the base surface treatment, the better, after the base surface is done, then use the plugging king to plug the sewer pipe, floor drain pipe and other nozzles around the leakage treatment, if possible, then use polyurethane, or acrylic to paint the periphery of the nozzle, this process is done after drying. Then use cement mortar to level, the yin corner should be made into a garden corner, and after the leveling layer is dry, you can directly do waterproof construction. It should be noted when painting waterproof coatings, because most of the coatings are two-component, first mix the powder and liquid materials according to the proportion of the instructions for use, and then paint, first match half of the material, because do the brushing twice, the material should also be mixed twice, the mixed material should be used up at one time, it is strictly forbidden to add water to dilute it halfway, wait until the first time to dry and then paint the second time, the direction of the second brush should be perpendicular to the first time, so that the painting will be more even, will not miss the coating, and the waterproof on the wall should be meter high. This can prevent the tide from infiltrating into the next room, after the waterproofing is done, outsiders are prohibited from stepping on it, protect the waterproof layer, and pay attention to the protection of the waterproof layer when the next construction sequence, and if possible, you can also do a layer of cement mortar protective layer.
Renovation of old houses, or rough houses?
The old house should first remove the original tiles, apply waterproof glue, and paste waterproof cloth. Reapply the paint. Fill with water, 24 hours, no leakage. Drain the water and dry the ground. tiling. >>>More
Bathroom
Waterproof practices >>>More