Can you tell us a little about how to install a toilet? Is this highly professional, and what issues

Actually, it's very easy, my toilet is self-contained.

Tools needed to install the toilet: silicone (neutral) + silicone gun, if possible, you can use a high-soluble hot melt glue gun (hot melt glue is more mildew resistant than silica gel), a flange ring (bought on the market, polymer flange is recommended). A handful of drivers.

Installation: Place the flange ring on the sewage nozzle and align it. The base of the toilet bowl is filled with silicone, and the drain is pointed against the flange, which is aimed at the sewage pipe.

Adjust your position and don't pretend to be crooked. Sit on the toilet, get up in about half an hour, sit on it and don't sway, you can turn on the bath bomb in winter, so dry the block. Install the water tank accessories in the water tank according to the instructions, don't try to save trouble, leak the gasket, otherwise it is easy to leak.

Don't cover it, or you will have to remove it in case you need to adjust it. Finally, screw the water tank to the toilet, and when screwing the screws, the left and right screws should be screwed left and right, pay attention to the balance, and connect the water inlet hose. Adjust the position of the water tank accessories, close the lid and put the water, and see if there is any water leakage between the water tank and the toilet, if there is a tight relationship between the water leakage adjustment screw.

It's OK if it doesn't leak, close the lid, add the button cover, and you're done!!

Every home has a toilet and everyone has to use it, and when it's finished, it's easy to make you happy......Andy Lau's "Toilet" is a household name. The toilet is a must-have bathroom product for every family, and consumers usually only pay attention to the choice of toilet brand, in fact, the installation of the toilet is also very important.

Item 1: Before the toilet is installed, it is necessary to do the inspection work in advance to ensure the smooth flow of the upper and lower pipes of the toilet. Because many real estate developers will have some solid impurities remaining in the pipes during construction, if they are not checked in advance, it is likely to cause blockage problems after the toilet is installed.

Matter 2: After connecting the water inlet pipe, the water tank should be connected first, and when there is no connection to the toilet, put about 5 minutes of water in advance to ensure the unimpeded flow of the water inlet pipe, the advantage of this is that the impurities remaining in the construction process can also be washed out, so as to avoid the blockage of the water pipe in the future, which will bring a lot of inconvenience to life.

Item 3: When purchasing a toilet, you should pay attention to the after-sales service of the product, and it is recommended to use a professional to be responsible for the installation.

Hello! First of all, when buying a flush toilet, you must choose the right size, so that it can be installed well. Open the toilet bowl first and check the position of the anchor screw.

If it does not correspond to the new toilet, it should be cleaned first. Cover the drain with a wooden board for a while to prevent clogging caused by foreign objects falling into it during installation. Next, clean the floor of the toilet seat.

Then apply waterproofing material where the toilet is installed, and fill the area around the drain with cement mortar, which is thicker! Place the toilet gently in the corresponding position, pay attention to the sewer must be aligned, put it in place with a little force, press and hold the toilet, and install anchor screws. Don't push too hard.

Finally, the gap between the new toilet bowl and the floor can be pasted with waterproof material and white cement. Do not use for two days after installation. Good luck.

When installing the toilet, use a wine-cup-like hemispherical shell filled with glass glue to empty the screws, and if you have a plastic cap, put glass glue on the cover.

To install the flange, some toilet accessories are belted, and some are not. It is better to install flange seals and will not run away.

It is recommended not to hit the expansion bolt, it is easy to damage the waterproof layer, it is inconvenient to repair in the future, and the expansion bolt of iron is easy to rust.

After installation, you can find a cigarette butt and throw it in, and you can flush it down at once, and the sound is not loud, which means that there is no problem.

Professionalism can not be talked about, my family has just replaced the toilet, there is a floor tile yin water phenomenon, the installation master is next to me when the operation, very simple answer, but the most important thing to pay attention to is the sewer pipe and the toilet drain seal, the seal is not good and easy to yin water.