How to construct such a ceiling?

Updated on Suspended ceilings 2024-09-16
3 answers
  1. Anonymous users2024-01-24

    You mean the arc of the C-shape.

    This thing can be made with a wooden keel, and a splint can be made.

    First, fix the shed and walls with a wooden square (or light steel keel).

    Then use blockboard to form small pieces, make a C-shape, and then connect with the fixed keel.

    Seal the façade of the C-shaped blockboard with a long splint and it's OK.

    Specifically, you can discuss with the construction master, who has more practical experience.

  2. Anonymous users2024-01-23

    In the tooling, blister gypsum board is now used to make a straight arc, and the back can be matched with a styling card keel. But home decoration is still to use pieces of blockboard to put together honestly. After all, it is more traditional, and many carpenters can do it.

  3. Anonymous users2024-01-22

    This is a gypsum board ceiling. First, the carpenter was asked to punch a prototype and then seal it with plasterboard. Generally, this is used in living rooms and bedrooms.

Related questions
2 answers2024-09-16

It is actually quite complicated to do this, the outer arch shell can be made of metal, and the internal shape is recommended to use gypsum There is a high-strength gypsum with good fire performance. If it's a steel vault dome, I'm an expert.

2 answers2024-09-16

Installation details of soft film ceiling:

1.First go to the construction site to see if there are conditions to install the keel: that is, to see whether the wall is completed, whether the carpentry part is qualified, and the plastering part needs to be completed first. >>>More

3 answers2024-09-16

3 All first of all, the ceiling electric hammer punching, homemade wooden expansion wedges, fixed the board, and fixed with the outside box. The outer box can be beaten with blockboard and pasted with plywood.

3 answers2024-09-16

First, use the woodboard to make a shape according to the arc (for keel), and then fix the gypsum board on the woodworking board. As shown below:

3 answers2024-09-16

1. Because the round one is round, it is round, and it will not fall down because of which side is narrower, 2, it is easy to transport, and it can be rolled, 3, it saves materials, the same large area, and uses less material, 4, the sewer mouth can reduce the probability of irregular objects (bicycles, stones, etc.) falling down after the sewer cover is stolen. >>>More