The bathroom floor is always damp, what is the solution?

Put some hygroscopic substances indoors, such as more economical quicklime (block lime) Reference answer: If the outside air is too humid, remember to close the doors and windows; If the house is too humid, to ensure that the room is ventilated, you can use air conditioners and fans to dehumidify. If the walls are covered with "sweat", it is advisable to buy a dehumidifier to dehumidify. In long-term humid areas, you can use charcoal in the room or bamboo charcoal under the indoor floor, which has a good effect on the balance of room humidity and dust prevention and air purification.

After bathing, the walls of the toilet look dry, but in fact, there is invisible water vapor. Therefore, toilets should not be built under stairs and plastic wall coverings should not be used; The tile joints that are attached to the wall and the ground should be coated with white cement, if the brick joints produce black spots, it means that the moisture is too heavy and moldy. Disinfect with disinfectant water in time, dry the walls with a hair dryer, and open the door more often at home to ensure ventilation so that the water can fully evaporate.

Also, try to dry the walls and floors as much as possible after bathing.

Only attention can be paid to strengthening ventilation or opening the door appropriately to alleviate it, mainly the walls of the bathroom. The surface of the glazed tile is not easy to absorb water, the ground is generally glazed brick, and the external window should not be opened as much as possible due to the fact that sometimes the humidity of the outside air is large, and the bathroom feels particularly humid.

The exhaust fan is the basic equipment of the bathroom, and the exhaust fan can be turned on frequently, in addition to discharging the moisture in time, it can also discharge the filth of the bathroom, which is conducive to physical health. If you do not have an exhaust fan, you should close the door when you leave the bathroom after taking a shower and allow the moisture to condense before entering to dry or blow dry with an electric fan. There is an integral shower room, so be sure to close the door when showering.

In fact, to avoid dampness in the bathroom, the best thing is to keep the ventilation of the bathroom, many houses have no windows, it is best to follow the exhaust fan or special air conditioner, try to let the water seal of the bathroom evaporate, and after taking a bath, wipe the ground in time.

Multi-functional biological waterproof glue and cement are selected according to the ratio of 1:3 to make cement slurry and full hook tile tile joints. Fill the gaps in the edge of sanitary ware and pipelines.

At the junction of the door frame and the ground, the door frame is sawed off with a small saw, 1 3 wide, 20mm and 30mm high, the local water is absorbed, and the waterproof cement slurry is filled, and the ground and wall are kept dry.

Whether the toilet is not steeped enough and poorly ventilated, resulting in water accumulation. If this is the case, you will need to clean the bathroom of the stagnant water and use something to dehumidify, such as activated charcoal or lime.

If the bathroom is not divided into dry and wet areas, then please try to install a shower curtain to prevent the bath water from splashing (special attention must be paid to the moisture-proof and dehumidification of the bathroom socket, once the power supply leaks due to moisture, the consequences are unimaginable).