-
Anonymous users2024-01-24In your case, you generally want to knock off the bricks, re-do the waterproof, knock it out, and then re-use the polypropylene cloth to make the waterproof dam, we generally have a 40-square-meter bathroom here, if the bathroom is not big, the whole process is 1000 yuan enough.
You can try not to get water on the bathroom floor, is the floor still wet, if it is still wet, then it is a pipe under the bathroom cracked, this has to change the pipe, smash the floor, it is more troublesome, you have to redo waterproofing and bricking.
If you can be sure that the water on the ground is leaking, there are generally these situations: Is the leakage in your house near the basket? Or near the toilet If it is, you can cut out the basket and fill the side with waterproof paint If it is not near the basket, then it depends on the leakage downstairs To be honest, it is very laborious to do Small work The average worker does not like to do it, you are sure to tell me about the specific situation.
-
Anonymous users2024-01-23Hello: First of all, look at the specific place where it is leaking, if it is the toilet where the water seeps, you don't need to pry open the floor tiles, buy a bottle of glass glue and make a circle, if it is other places can only be planed, remember to buy waterproof materials to do, and the wall skirt to achieve a certain height.
-
Anonymous users2024-01-22You have to knock on the bricks and redo it, and the rest is useless!
-
Anonymous users2024-01-21Do not do engineering, but can provide free professional technical advice on concrete waterproof leakage repair, eliminating the trouble of repairing today, leaking tomorrow, repairing every year, and leaking every year!
-
Anonymous users2024-01-20The best way to do it is to do it all over again.
There will be no aging problem when buying good materials for waterproofing, because good materials have the same life as the base layer (except for the cracking of the building).
Now good materials are basically imported brands.
Henkel in Germany, Mapei in Italy, and Sika in Switzerland are all relatively good.
1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More
The height is determined according to the need, generally speaking, the bathroom is waterproof 180 cm high, and the non-shower wall waterproof coating cannot be less than 35 cm in principle. However, in order to strengthen the waterproof effect, it is recommended to achieve a uniform height of 180 cm. In addition, for the light wall of the toilet and bathroom renovation and the self-built light wall, it is recommended that the waterproof height should be at the top. >>>More
My bathroom in the waterproof layer of the leather floor tiles under the seepage, seeping into the downstairs living room, the bathroom is all demolished, redone to drain water and decorate the floor tiles, downstairs living room water seepage repainted.
1. Environmental protection.
If you choose a product that is not environmentally friendly, after the waterproof layer is made, the harmful gases will be slowly released under the thick floor tiles or cement. Therefore, if you want to buy waterproof materials, you must go to the regular building materials store or supermarket, choose a well-known brand, generally good brand products are equipped with product test reports, product certificates and China environmental labeling certification of the ten ring mark or CTC mark. >>>More
If it is cracking, it is, but the wrong product is chosen, and there are different reasons for cracking and leakage in the bathroom.