-
Anonymous users2024-01-24There must be information to participate in the assessment, and the inspection batch can be divided by layer (no deformation joint) or segmented axis.
It is not allowed to open the hole at will, and the opinions of the original designer should be sought, or under the guidance of the designer.
Most of the cantilever beams on the first floor of the balcony are "stranded"! The lower part of the cantilever beam is not equipped with stressed steel bars, and "stranded" means that the end of the cantilever beam is on the outdoor ground, and the cantilever beam becomes a simply supported beam, and the lower part of the simply supported beam is bound to crack if there is not enough steel bar. It should be disconnected from the outdoor ground to form a suspension.
It is best to pour twice, the difficulty of pouring is very, very large, the hanging mold is very difficult to fix, a dozen concrete will run around, and generally pour concrete at night, the worker does not worry about that at all, and the next morning is in a hurry to dismantle the mold and put the line, and the guide wall is not destroyed.
Further lofting on the original baseline to obtain the baseline to be used for the secondary structure, but in doing so, there will be a bad deviation from the primary structure, because when the primary structure is done, there will be an error, if it is large, the secondary structure will go up, and the deviation will come out, and it will not be close, and it is not equal to the imagination. >>>More
Let's negotiate, after all, they are all neighbors, how good it is to be polite, let him find someone to help you get it right, if others don't want to, and the money is not much, find someone to get it yourself, there is no need to make a big deal about a little thing. To be harmonious, of course, if you do want people to compensate, you can go to the court to sue if you can't negotiate (usually civil mediation).