-
Anonymous users2024-01-24It's definitely not good, I bought a small bag of waterproofing agent, which is actually high-grade cement pre-mixed with very fine quartz sand. About 1 kilogram, 15 yuan.
If the color of the cement is dark and affects the overall appearance of the bathroom, there is also a white tile caulk, which looks the same as white ash, and is produced in Tianjin, a small bag of 10 yuan a kilogram.
Both are similar in terms of usage: mix them with water to form a sticky paste and rub them over the gaps. Finally, use your index finger to wipe it, and then stick it to the tile next to it and wipe it off with a dry rag after it dries slightly.
-
Anonymous users2024-01-23I don't think that's necessary, waterproof is important in sparse and not blocked.
-
Anonymous users2024-01-22If you don't care about the smell, you can spray the Thunder Escape AC rubber chassis armor, which is suitable for you to do waterproof materials.
-
Anonymous users2024-01-21One is glue, the other is paint, it is recommended to use chassis armor.
-
Anonymous users2024-01-20Not good. The kind of paint is not flexible and easy to crack if the brick is pasted.
It's definitely not good, I bought a small bag of waterproofing agent, which is actually high-grade cement pre-mixed with very fine quartz sand. About 1 kilogram, 15 yuan. >>>More
After the bathroom is waterproofed and then wraps the riser, there is basically no big problem, but when decorating, the pipe is generally wrapped first, and then waterproofed later, for fear of leakage in the interface place.
The main thing is to see what the problem causes the waterproof leakage, if the waterproof quality is unqualified, this waterproof must be responsible. Waterproofing leakage can also be caused by other reasons, such as waterproofing cracking due to operational problems when backfilling after the first layer of waterproofing, or waterproofing cracking caused by improper operation of other work after waterproofing. >>>More
Depending on the specific situation, such as the season, the ventilation of the bathroom, the quality of the waterproofing products, etc., will affect the air-drying time. >>>More
Let's go downstairs and tell me first. I'm going to test the waters, you pay attention. Then you test the waters for 24 hours. Take a flashlight downstairs to the shed to see if there is a water leak.