-
Anonymous users2024-01-23Depending on the specific situation, such as the season, the ventilation of the bathroom, the quality of the waterproofing products, etc., will affect the air-drying time.
The special waterproof material can be made of water discharge very quickly. However, for ordinary products, it is recommended to do the experiment after 12 hours to be safe.
-
Anonymous users2024-01-22After the waterproof effect of the bathroom is done, you can do a waterproof effect test to test how well the waterproof effect is done. If there is no water leakage, it means that the bathroom is waterproof. Wait until it is completely dry before using the bathroom, and it is best not to scrub it for 30 days, the waterproof effect is longer.
-
Anonymous users2024-01-21After the bathroom is waterproofed, you can do a closed water test after the waterproof layer is completely dry.
The closed water test time is generally 48-72 hours, and the ground can be tiled after the closed water test is completed, and it can be used normally after waiting for two days after the brick is finished.
Waterproofing construction of toilets.
After that, you must wait for the waterproofing coating of your choice.
coating"Finalization"(i.e., the meaning of complete solidification) can test the water, and various waterproof coatings are implemented in the product standards.
There are clear regulations in the product, and the requirements for the final setting time are also different for different products.
> However, in general, such as the commonly used "general-purpose K11 waterproof slurry", the water can be tested 24 hours after normal construction. The water test time is 24 to 48 hours, if the waterproof material reaches the final setting, it will not accelerate the aging of the waterproof layer due to the extension of the water storage time, please do not worry.
-
Anonymous users2024-01-20After the bathroom is waterproofed, it needs to be thoroughly dried, so that it can do the closed water test, you can contact the residents downstairs in advance, so that the leakage can be informed in time to avoid unnecessary losses of the downstairs residents When doing the closed water test, the depth of water storage can not be less than 20 cm, and the time can not be less than 72 hours, and the water level does not fall is qualified.
-
Anonymous users2024-01-19How long can the bathroom be dry after waterproofing: the bathroom is dark and damp and impermeable, at least 3 days in this season, it is not dry, and the tiles will bulge after a long time.
First of all, the leakage should be repaired, and if the traces of previous leakage on the wall are serious, it can be dried in half a month.
After the bathroom is waterproofed, it needs to be thoroughly dried, so that it can do the closed water test, you can contact the residents downstairs in advance, so that the leakage can be informed in time to avoid unnecessary losses of the downstairs residents When doing the closed water test, the depth of water storage can not be less than 20 cm, and the time can not be less than 72 hours, and the water level does not fall is qualified.
The bathroom can be waterproofed without tiles, but there must be cement mortar on the waterproof layer, and there must be a certain thickness, otherwise the waterproof layer will be damaged! Let me share with you the construction of bathroom waterproofing: >>>More
In general, it does not take so long, and after knocking off the original tiles, you can re-use mortar waterproofing agent to do waterproofing after the ground is all dry, and it does not take 7 or 8 days to dry under normal circumstances.
It's relatively easy to do it yourself.
First: ground leveling is the uneven place needs to be leveled, so as to save the amount of waterproof mortar and ensure waterproofing. >>>More