-
Anonymous users2024-01-24It depends on whether the toilet can be flushed before, and if it can be flushed before, then it can be flushed. If it is still often plugged at the beginning, it depends on whether the bottom hole is not aligned or the toilet flush is not good, if the flush is not good, you can find a merchant. The question about the water droplets should not exist, you can look carefully, whether the water hangs on it after flushing or comes out of it, if it really comes out, it is a big quality problem:
-
Anonymous users2024-01-23It can be determined by your question supplement.
It's the toilet that's clogged.
Let's clean it up carefully.
However, external water seepage may not be easy to deal with.
Because this explains the inside of this toilet bowl (siphon S bend).
There's a problem. And the water absorption rate is too high.
Definitely more than 5 thousandths of the national standard!
Otherwise, how can there be water droplets?
It is recommended to replace the toilet!
-
Anonymous users2024-01-22The glaze on the inside of the toilet bowl is not good, and it is not easy to flush and waste water! The water seepage is estimated to be cracked!
1.Cleaning: The toilet seat should be cleaned with a diluted household disinfectant every one or two days. >>>More
1. Go to the grocery store and buy a sewer dredger, which looks like a spring and has a steel wire inside. >>>More
Filling up the water and using the brush to brush the toilet bowl to quickly piston back and forth at the toilet drain will solve the problem in a few moments.
Fill a bucket with water, aim at the flush port, and quickly flush it down, it is estimated that it will be OK In addition, there is a special lifting to avoid the toilet plugging, go buy one, maybe you can solve the problem that the toilet is not stuffed to the point where you need to find maintenance personnel. >>>More
It is definitely a white pipe blocked, but it can be washed away with a strong flush with water, if there is a high-pressure water gun. >>>More