What to pay attention to when buying a toilet

Measure the pit distance of your own home before buying.

At present, there are more 300mm, 400mm

First of all, of course, the glaze.

Good glaze has low water absorption.

If the water absorption rate is low, it is not easy to get dirty, and it lasts for a long time!

Look at the flush parts again, good flush parts can be used for decades.

Now look at the material of the cover.

Don't buy plastic, soft, or thin ones.

Changing the cover every once in a while is also a headache.

It's better to choose a big brand.

Because the after-sales service is guaranteed.

Don't be cheap, you can't find someone to do after-sales service later.

Had to replace the product again.

That's more than worth the loss

The smart toilet has many special functions: such as buttocks cleaning, lower body cleaning, moving cleaning, seat insulation, warm air drying, automatic deodorization, silent sitting and so on.

Tips for buying a toilet bowl:

Look at the weight: Generally speaking, the heavier the weight of the toilet, the better the quality, because the density of the heavier toilet, the material is solid and the quality is better, the simple way to test its weight is to pick up the lid of the water tank to weigh it, but be careful not to slip your hands

Look at the capacity of the water tank: for the same flushing effect, the less water consumption is, of course, the better, we can use a mineral water bottle to add water to the empty water tank, roughly estimate the capacity of the water tank, and see if the water consumption is consistent with its identification.

Check for leaks: Drop blue ink and other elegant liquids into the water tank, and stir well to see if there is colored liquid left at the outlet of the toilet, if so, it proves that the toilet has a leakage problem.

Check the parts: you can press the flush button to listen to the sound, the crisper the sound, the better, but also observe the size of the water outlet valve in the water tank, the larger the valve, the better the water effect.

Look at the glaze: you can use the principle of reflection to observe, to see whether the glaze is smooth and foam-free, but also to touch the toilet drain, if the drain is rough, it is easy to hook the garbage in the future use.

Measuring diameter: the glaze on the inner surface of the sewage pipeline should not remain dirty, which can reduce the occurrence of blockage.

Test flushing: Try it directly to see if the flushing effect is good.

Toilet purchase precautions

1. Look at the drainage method at home, which is generally divided into lower drainage and rear drainage.

2. Confirm the distance between the drainage walls in the home, which is the so-called "pit distance".

3. There are two kinds of toilets, split and conjoined, the conjoined type is connected to the water tank and the base, which is beautiful in shape and sturdy, suitable for smaller toilets. The split type is that the water tank is separated from the base, which is large in size (occupies a large space), and is not easy to lean against the wall, and is not properly installed, which is easy to cause water leakage.

Straight out or horizontal out is the way the water is out, one is under the toilet and the other is behind the toilet. The pit distance is the distance from the wall to the sewer, I still think the brand is good, Huida is OK, the glaze is good, the price is OK, the toilet seat is hard enough, and the toilet bowl that is too white should not be bought, there is more radiation, and additives are put to whiten.

Hole spacing to see if you can install 300 or 400 (national standard), this community is basically the same, before I installed when the Ausman bathroom seller told me, Ausman clerk also told me that the most important thing to choose the toilet is to look at his sewer and glaze, good sewerage, water-saving, the third generation of the inner wall of the pipe is glazed The third-generation one-piece toilet is the best, and the current domestic brand is only their Ausman. Hehe, my home decoration is theirs, it's really easy to use and comfortable to sit on, they say it's okay to use it for one or two decades.

Be sure to look at the pit distance, otherwise there will be a big problem when you buy it back and install it. Generally 300 400mm. It's best to choose the siphon type, which is the kind you said is horizontal.

Zhiluo is basically about to be eliminated. Then see if the toilet meets the national water-saving standards. The water absorption rate is not less than 100%.

Such a water absorption rate is in line with the standard. Of course, the lower this indicator, the better. It proves that this toilet bowl has reached full vitrification.

Such a product will be odor-resistant, water-impermeable. In short, it is more reassuring. Looking at the accessories, the quality of the water tank inside is also crucial.

You can see if the weight of the toilet is large. It's better if it's bigger. There are also one that should be molded in one piece, so that there will be no water leakage.

You can ask him to test it for you on the spot.

It depends on you, what kind of buying, what price to buy, mainly.

Look at whether it's good or not, how the accessories are, and the glaze, I think the four-dimensional is good.