I want to teach myself how to make furniture and interior design in CAD, and I want to be a professi

UG furniture design tutorials, NetEase Cloud Classroom is available! Find out for yourself!

The three views are very simple, if you want to draw three views quickly, generally you first draw the main view, and the top view, there is a common point of projection between them, this you will be able to experience this when you look at the book, and then you will copy the top view you draw, put it on the right, and then turn it 90 degrees, it is also the use of the projection method, it is a projection with the common characteristics of the main view and the top view, so that it conforms to the law of length and width alignment, the skill is here, you first review the rules of object projection, Since this question involves a relatively broad sense, you have to remember the salient feature above, which is the advanced point of CAD, the early hand drawing can only be done in three drawings together, and there are a lot of auxiliary lines for 90-degree turns.

After 3D modeling, you can do whatever you want! I'm using UG

With 18 thick plates, the distance between the fulcrums is not more than 600 mm, do not process the word steel, there is no problem. Varnish can act as a protective effect. >>>More

This technology has been in place 20 years ago, that is, the material that needs to be printed with color patterns (such as wardrobe doors, etc.) is brushed with the base paint required by the customer, and after drying, it is used to brush a thin layer of varnish on the surface, and when the paint surface feels viscous, paste the required pattern on, remove the plastic paper of the picture, and wait for the pattern to dry, and then brush a layer of varnish to protect the smoothness and adhesion of the pattern. The average painter can do it.