What to do if you drop the plastic lid in the swivel toilet and block it in the toilet

Three methods: 1. Buy a toilet in the supermarket and press it a few times to the toilet hole. 2. After seeping out the stagnant water, buy a bottle of strong decontamination plug liquid (strong acid) in a small hydropower building materials store and pour one-third of it to dredge and dissolve it, it will heat up and make a noise, be careful not to splash.

3. Buy a hand-cranked spring plug-through, slowly insert it into the hole and shake the plug-through, and bring out the plastic cover.

The toilet seat is easy to yellow after a long time, especially if it is made of bad plastic, it is usually cleaned in time in life and kept clean, now it is yellow, you remove it and put some salt water, dish soap and other cleaning, if it can't be washed off, it is normal, the cover on the net is relatively cheap, you look at the size to go to the Internet to find one.

1.Suck with a toilet. 2.

Strong decontamination plug solution: After seeping off the stagnant water, pour a third of the strong decontamination plug solution (strong acid) to dredge and dissolve, it will heat up and make a sound Be careful to be splashed3. Hand crank spring plug device, use hand spring plug to slowly insert into the hole and shake the plug to bring out the plastic.

Go to the hardware store and buy a dredge for a few bucks.

Just go back and get through.

Go find a plumber to get it for you.