-
600 tiles on the wall? Is that what that means?
The water absorption rate of floor tiles and wall tiles is not the same, first of all, it should not be mixed, and what the above two floors say makes sense.
It is recommended that you knock it out and re-paste it, or it will be more troublesome after the furniture enters the site, and the problem will be solved as soon as possible.
-
Oh, the size of the wall tiles should not exceed 350 400, otherwise it will be empty and wasteful.
-
1.The cement mortar used is not in the right mix ratio. Cause the base layer of the brick and the wall to be poorly bonded.
So the bricks all drum 2The tile was not fledged on the brick wall before construction or there was a lack of construction procedures. That is, cut corners 3
The other factors are; The material is not right, the labor is not right, the construction method is not right, and the above factors will cause your brick wall to bulge and crack.
Bought a house with hard work, don't think worry-free, in fact, decoration is the most headache, such as a good design plan, such as which place should be decorated better, these need to be carefully considered. >>>More
Yes, some home improvement halls will stick 600 600, the bathroom is relatively small, it is best to cut into 300x600 paving, or choose 400x800.
Generally, the price ranges, there are more than a dozen yuan, and there are more than a hundred, you can choose, and the medium one is only thirty or forty!
It depends on the brand and origin.
The price difference is large. >>>More
The bathroom wall can be 600*600 bricks into two, cut into 300*600, and the floor is recommended to be paved with 300*300.