-
Anonymous users2024-01-24The toilet triangle valve halter in the bathroom should be about 30cm away from the center of the toilet.
Reason: 1. The "connecting hose" from the triangle valve to the toilet is 50cm long, so if the spacing is 30cm, the connecting hose is just extended, and it will not bend, and the spacing is too close to bend the connecting hose. Hoses that are bent under excessive water pressure for a long time are very prone to breakage.
2. The distance of 30cm apart gives enough space for the maintenance and replacement of the triangle valve, because the length of the "wrench" used in the replacement of the triangle valve is just about 30com, so that there is enough space for the "wrench" to rotate when replacing the valve.
-
Anonymous users2024-01-23Depending on the size of the toilet base you want to install, the seat margin is about 10cm away from the triangle valve, which does not affect the installation and maintenance and is more beautiful.
-
Anonymous users2024-01-2225 cm from the center of the toilet drainage
-
Anonymous users2024-01-21The seat margin is about 10cm away from the triangle valve.
-
Anonymous users2024-01-2020-30 cm...
-
Anonymous users2024-01-19Summary. Hello, I am happy to serve you, here after the teacher's inquiry, the toilet triangle valve halter should be about 30cm from the center of the toilet, and the bathroom toilet triangle valve cam should be about 30cm from the center of the toilet. Reason:
The "connecting hose" from the triangle valve to the toilet is 50 cm long, so if you choose a 30 cm spacing, the connecting hose is just stretched and will not bend, and it is easy to bend the connecting hose if the spacing is too close. For a long time at water pressure. The distance of 30cm gives enough room for repairing and replacing the triangle valve, because the length of the "wrench" used in the replacement of the triangle valve is just about 30com, so that I wish you a happy life when replacing the valve If you are satisfied with me, please give the teacher a thumbs up <>
Hello, I am happy to serve you, here after the teacher's inquiry, the toilet triangle valve halter should be about 30cm from the center of the toilet, and the bathroom toilet triangle valve cam should be about 30cm from the center of the toilet. Reason: The "connecting hose" from the triangle valve to the toilet bowl is 50cm long, so if you choose a spacing of 30cm, the connecting hose is just stretched and will not bend, and the spacing is too close to bend the connecting hose.
For a long time at water pressure. The distance of 30cm apart will give the repair and replacement of the triangle valve enough room for the mold, because the length of the "wrench" used in the replacement of the triangle valve is just about 30com, so that when the valve is replaced, I wish you a happy life If you are satisfied with me, please give the teacher a thumbs <>up
Is 15 cm okay?
It's too low, the minimum is 20cm
It's already done, will it affect the installation later?
The installation needs to look at the master, if the master is mature, there will be no problem.
Well, got it. It's best to be between 20 and 30, right? Yes.
Below the toilet tank, generally on the left.
If your toilet is fully enclosed, it will be more troublesome and you will have to close it by touching it. >>>More
As long as you buy a longer hose, you can connect it, but it is a little inconvenient to use.
First of all, it is necessary to confirm the leakage of the triangle valve and find the triangle valve dealer to claim compensation. There is a cause and then an effect.
This is not a leak from the triangle valve, but the rubber mat of the hose behind the angle valve is broken, and the leather mat needs to be replaced to fix it.
It is also possible to install a triangle valve in the bathroom tank. But when it comes to servicing the tank, the main water valve needs to be closed. It will be more troublesome. Therefore, it is best to install a triangle valve in front of the water tank in the bathroom, so that it is easier to repair the water tank.