What are the installation steps of the shower room, and the precautions for the installation and ins

Updated on Shower room 2024-09-10
2 answers
  1. Anonymous users2024-01-24

    Nowadays. Living home house decoration.

    Most people have their eyes on the shower room.

    decoration on top of how to lay out the bathroom.

    What is the minimum size of the shower room, are one of the more concerned issues, even if the ruler is measured, the data is just data, whether it can intuitively reflect the actual size of your shower room can only rely on your imagination. Today, I will tell you about the specifications of the shower room.

    Basic size vs. minimum size

    1.Shower room width:

    Basic size: 900mm*900mm Minimum size: 800mm*800mm

    At the very least, it is necessary to ensure that the body can rotate freely during use and will not always hit the glass. Generally, 900mm*900mm is appropriate, if the family is fat, it can also be made into 1000mm*1000mm, or bathroom.

    The room space is limited, so it is OK to make it 850mm*850mm, but it is best not to be smaller than 800mm*800mm.

    2.Shower room height:

    Usually suspended ceilings. The height is 2400mm, so the height of the shower room is mostly 1800mm 2000mm, which can also be adjusted according to the height of the family, the actual space situation, and the shower also needs to be paid attention to.

    The position is comparable, too low is easy to splash water outward, too high will hinder the appearance and affect the air permeability.

    3.with heating equipment.

    Distance:

    For the convenience of bathing in winter, everyone will give the toilet.

    Install a fan heater or bath bomb.

    If it is a measuring equipment, it is best not to put it in the shower room or near the glass of the shower room to prevent moisture. If it is hung on the top, it depends on the size of the bathroom, and the heating equipment is placed in the middle of the small space, not necessarily in the shower area, if the space is relatively large, it can be placed in the middle of the shower area, try not to face the shower.

    Shower room glass, otherwise not only can not achieve a good heating effect, but also easy to cause product aging or self-explosion.

    4.with other sanitary ware.

    Distance:

    Bathrooms are often compact, and there is often a bathtub next to the shower room.

    Toilet. Bathroom cabinets.

    It is necessary to leave a spacing of about 100mm, otherwise it is easy to affect each other when it is easy to use, which increases the possibility of self-explosion.

  2. Anonymous users2024-01-23

    1.Before installing the shower room, please confirm that there is no abnormal phenomenon. 2.

    After the shower room is unbundled, place the glass vertically against the wall. Horizontal or uneven placement can cause glass breakage, resulting in property damage or personal injury. 3.

    Please be careful when transporting. After unpacking, horizontal transportation of the shower room is easy to break the glass, so please carry it vertically. At this time, it must be carried by two people, one person is prone to accidents, and pay attention to avoid collision with hard objects.

    4.Do not knock on the shower room or let hard objects fall on the shower room to avoid breakage or deformation. 5.

    Be careful if a flame ignites such as a cigarette can damage the spray or glass. 6.Do not stand or lean on the shower room, and do not place heavy objects on the shower room.

    7.When cleaning, it is strictly forbidden to use acids, alkalis, organic solvents and acidic and alkaline cleaning agents, otherwise the surface of the product will be damaged. Please use water or neutral cleaning.

    When water or mild detergents can't remove the stain, use a cleaning cloth soaked in a small amount of alcohol to remove the stain. 8.Ventilation and drying in the bathroom is the most basic requirement, and the exhaust fan can be used to strengthen the circulation of air and water vapor after showering; If the bathroom is in an enclosed space, do not rush to close the doors and windows after leaving, leave it on for about 10 to 15 minutes to allow indoor and outdoor air convection to help with humidity and temperature discharge.

Related questions
7 answers2024-09-10

The installation steps for the shower room are as follows: >>>More

1 answers2024-09-10

My house has just installed a Denok shower room, the installation steps are not complicated, there are four steps in total: 1. Prepare materials and tools; 2. fixed frame; 3. Install glass and top frame; 4. Install the sliding door and handle, and the door-to-door master Bo will install it while talking, and the installation is very fast.

1 answers2024-09-10

1.The first step should be for the installation of the basin. For the installation of the bottom basin, it is true that the waterlessness of the bottom basin is an important point. >>>More

5 answers2024-09-10

The first step should be for the installation of the basin. For the installation of the bottom basin, it is true that the waterlessness of the bottom basin is an important point. If there is moisture retained, it will have a great impact on the installation. >>>More

2 answers2024-09-10

Hello, according to the size of the bathroom and personal preferences to set the shower room plan, to lay the floor tiles when buried in the water retaining strip, and after the end of the integrated ceiling, you can install the shower room before the installation of the toilet and basin. Because the shower room is generally installed in the innermost, it is easy to install and not easy to touch the beautiful toilet and basin at home.