-
Anonymous users2024-01-24It is recommended to use JS, what you said is clumped after brushing? JS generally doesn't have this kind of situation, you added the plugging king? JS plus cement, first scrape once, and then paint twice without anything else, the waterproof effect is quite good.
The flexibility and adhesion of K11 are not as good as JS. The smell of polyurethane toluene is too strong, and the requirements for the construction base surface are high, and it must be free of moisture and dust.
-
Anonymous users2024-01-23Bathrooms can be equipped with waterproof coatings for kitchens and bathrooms. Or use K11 flexible type for the floor and K11 universal type for the wall. JS can also be used, and it needs to be mixed in a certain proportion when it is used with cement.
-
Anonymous users2024-01-22JS and K11 pull strength are not ideal! The thickness of JS is generally not up to it, and the K11 stretch force is too poor! It is recommended to use polyrouge for waterproofing, the tensile strength is good, and the thickness is also easy to achieve! It's just that the smell is louder during construction!
-
Anonymous users2024-01-21It's better to make a flexible K11! That's what I do!
-
Anonymous users2024-01-20JS and K11 tension rubber drafts are not ideal! The thickness of JS is generally not up to it, and the K11 stretch force is too poor! It is recommended to use polyrouge waterproof bucket, the tensile strength is good, and the thickness is easy to achieve! It's just that the smell is louder during construction!
1. Of course, K11 is all selected, K11 waterproof coating has permeability, and it is much better than JS to do directly on the cement-based surface, JS is mainly conjunctival waterproofing, and K11 is permeable plus conjunctiva.
About 20 square meters, it is best to put water to try whether the leakage is leaking before using it in the bathroom, and if it leaks, the main leakage point will be treated, and the place where it does not leak can use less materials, so that it can be done more squared.
The kitchen waterproof coating is good with k11 waterproof coating, and Shenzhou Dragon K11 flexible waterproof coating is a two-component, acrylic high polymer modified cement-based waterproof material. It is composed of high-quality aggregates and powders of selected additives and liquid polymer additives, after the powder is mixed with additives, a chemical reaction occurs to form a tough elastic waterproof membrane, which has good adhesion to concrete and mortar, and can form a tight and strong permanent bond with it, preventing the penetration of water.
Yes, home decoration bathroom waterproofing is a very important part of the decoration, commonly used waterproof materials are mainly polymer cement mortar waterproof materials, of which K11 waterproof is representative, suitable for use in waterproof areas such as bathrooms, kitchens, balconies, etc., it is recommended to find personnel with construction experience to carry out construction, and there is a guarantee in the later stage. Hope it helps!
Capillary phenomenon, it should be that the waterproof layer is too absorbent, and its impermeability should not be good, whether the material is wrong or there is a problem with the construction.