What are the common problems of solid wood flooring and what are the solutions

Updated on Solid wood 2024-09-27
2 answers
  1. Anonymous users2024-01-24

    Degumming is mostly seen in composite flooring, there is no glue on the solid wood floor, unless it is installed by glue method, in this case, the falling off is mostly due to the poor floor glue, the one that can be removed is removed, the residual glue is cleaned, and the new floor glue is pasted. It is generally recommended to use elastic polyurethane glue or silane glue (not silicone), which can adapt to the deformation of the wood.

    Warpage is caused by poor installation, and the new floor should be unpacked and spread out for at least a week after entering the site, so that the moisture in it can adapt to the surrounding environment, and the installation effect is best when its deformation is stable. But the pace is too fast nowadays for very few people to do this, and knowledgeable workers will leave a certain gap so that it can be moved when it is deformed, but if the expansion joints are not enough, the floor will warp into tiles or even arch completely. For the former, wait until the hot and humid weather (swelled to the end) and then polish and paint, so that the floor effect is better than that of a new installation (no seams, it is a whole feeling).

    It is recommended to use environmentally friendly water-based floor paints. Of course, if you don't live by yourself or want the paint film to be plump, you still use oil-based paint! For the latter, quickly remove it and reinstall it.

    Severely deformed on the edge or replaced.

    Peeling off the surface is a problem of poor floor paint, so you can only polish it off and repaint.

  2. Anonymous users2024-01-23

    1. Insect moth: Due to the insect moth in the wood, piles of powder can often be seen on the surface of the sports wood floor. These are related to the selection of materials for sports wood flooring.

    Solution: Screening logs; sports wooden flooring keel put insecticides;

    2. Cracks: There will be gaps in the sports wood floor after a period of use, which is mostly related to the moisture content of the sports wood floor before it is laid.

    Solution: control the scientific moisture content of sports wood flooring; Sports wood floors are painted and covered;

    3. Sound: Due to the low quality of the paving of sports wood flooring, people hear the creaking sound when they walk around in the later stage.

    Solution: sports wood floor paving ground leveling;

    4. Drumming: Some sports wooden floors are damp and swollen after paving. This is mostly related to the environment around the solid wood floor, especially the foundation is too wet or the solid wood floor is flooded.

    Solution: Sports wood flooring is waterproof and moisture-proof.

Related questions
3 answers2024-09-27

1. Excessive noise: Due to the low quality of floor laying, people will make a creaking sound when they walk on it, which is very uncomfortable after hearing it. For this reason, it is necessary to pay attention to the strong connection between the keel and the ground, the floor and the keel, and the number and length of nails are appropriate. >>>More

1 answers2024-09-27

The size of the keel can not be too thick, otherwise it will affect the space used, and the general thickness is 4 error. >>>More

1 answers2024-09-27

Custom-made furniture – strong personalization, but high price. >>>More

1 answers2024-09-27

The scope of ceiling engineering is wide, but no matter which type, reasonable design, high-quality materials, and standardized construction technology are important factors to ensure quality and safety. >>>More