-
Anonymous users2024-01-24Double-layer gypsum board can eliminate this situation, and large areas of suspended ceilings will have a deformation period, so do not go to apply paint immediately.
Ceiling cracking is mainly due to the decoration process is not in place and the poor quality of the inlaid putty or bandage used, in this case, the original bandage can be removed, and then hook a 5mm gap, and then fill with the inlaid putty, and then use high-quality bandage to paste the seam, in the batch of putty, after grinding the latex paint on it, gypsum board splicing should be left with about 5mm gap, to prevent the top surface from arching caused by moisture expansion, it is recommended to consult lightning refresh.
Cuts are mainly caused by improper or incorrect use of knives and electrical equipment. The precautionary measures are: (1) When using various knives, attention should be concentrated and the method should be correct. >>>More
It's not just the reason, if it's putty powder, it means that the glue in the putty powder is not enough, if there is still time, spray paint from the new paint film to be full. >>>More
I think this kind of installation needs to try not to lean against the wall, so as not to invade the wall moisture.
There's that kind of set of circles on the gas stove to spread the heat evenly across the bottom of the pot, and to boil water faster or something... >>>More