-
Anonymous users2024-01-24Now the tiles, because the tiles are getting better and better, so the water absorption rate is constantly decreasing, the traditional cement river sand can no longer meet the requirements of the tiles, and the size of the tiles is getting larger and larger, so it is more difficult to stick, so it is recommended to use professional knot materials, such as porcelain stickers to paste tiles.
Porcelain sticker is a special tile knot material, so there is no need for wet walls, bubble bricks, support and other steps, at the same time it is also a thin paste method, the thickness of the paste is mainly about 5MM can save a certain amount of space, the following is the standard construction method:
1. Pour the porcelain sticker powder into clean water and stir it into a paste (mixing ratio: 20kg powder 6kg water), after stirring, it needs to stand still for about 10 minutes, and then stir slightly before use, which helps to increase the adhesion force.
2. Use a toothed scraper to apply the glue on the working surface to make it evenly distributed and form a toothed shape.
3. Knead the tiles on the top during the drying time.
Ordinary families should not forget to install water purifiers. Someone said: We drink tap water all the time. >>>More
Regardless of whether the tiles are dry or wet, they actually have no effect on the waterproofing of the bathroom. As long as the bathroom waterproofing is done in accordance with the requirements of the standard, then no matter which method is used, there is no problem with tiling. The bathroom is waterproof, the standard requirement is that the ground needs to be done, the wall should be at least meter, it is recommended to do the full height, if it is a lightweight wall, then it must be done full height. >>>More
This is not accurate, because the dimensions and wall bases before the bathroom was built have already been calculated, and then tiled according to that. I hope the Chinese Home Furnishing Mall will be helpful to you, thank you!
It is recommended that you use the wet laying method in the bathroom, but pay attention to the inspection when laying to prevent hollowing. >>>More
I only know that the dry paving is done before the waterproofing project poured asphalt as a waterproof layer, and then the tile is relatively simple, not with a lot of cement mortar for paving.