What are the tips for new tiles in the bathroom

The bathroom is usually about 4 square meters, and it is not recommended to use large floor tiles even for large bathrooms. The bathroom space is smaller than other spaces, and there are more corners, so if you use large-size tiles to face cutting, waste is inevitable, and it is not conducive to installing floor drains and leveling the ground.

Glazed tiles are mostly used in bathrooms, and general brands have matching small floor tiles, mainly matte. The specifications of wall tiles are generally determined by the actual size of the space. The commonly used specifications for the ground are 300 300mm and 330 330mm.

This kind of brick is affordable and suitable for ordinary household use.

Mosaics are also commonly used in European-style rooms. The price of this material ranges from tens of yuan to thousands. Mosaic is used in the bathroom, and the designer of Zhengzhou decoration company suggests that it is better to use it locally, if it is used all, it is visually cluttered.

European-style decoration also uses more 10 10cm small bricks, and more to diamond-shaped laying, this paving labor cost is several yuan higher than ordinary materials, and paving is more time-consuming, testing the technical level of workers, consumers should be more cautious when choosing.

When buying ceramic tiles, you can observe from the side whether the brick surface is flat and whether there are pinholes of uneven thickness. At the same time, you can tap the tile to listen to whether the sound is crisp, the more brittle the sound, the higher the texture density of the tile, the better the hardness.

High-quality tiles have very low water absorption, so they dry quickly. If the tile does not indicate the water absorption, you can use tea or water droplets on the back of the tile, and check the diffusion degree of the water droplets after a few minutes.

If you want to paste tiles well, you need to look at it from two aspects: adhesive materials and standard construction

1.Laminating materials.

Paving ceramic tiles, it is recommended to use special tile adhesive, not only the adhesion force is more than three times that of cement river sand, but also the construction is simpler, no need to wet and wet the wall, soak tiles, fix support and other processes, only need to add water to deploy construction;

2.standard construction.

Standard construction is the guarantee of good results, so be sure to follow the following methods to pave:

1) Pour the porcelain paste powder into water and stir it into a paste (mixing ratio: 20kg powder 6kg water), after stirring, it needs to stand still for about 10 minutes, and then stir slightly before use, which helps to increase the adhesion force.

2) Use a toothed scraper to apply the glue on the working surface to make it evenly distributed and form a toothed shape.

3) Knead the tiles on top during the drying time.

Laying tiles looks simple, but if you really do it, you need to pay attention to skill. When pasting tiles, the cement should be placed a little full, and the amount of cement around the surface of the tile is about the same, so as to ensure that the tiles are firmly glued and will not be hollow. After paving, use a special small hammer to hit the surface of the tile to detect whether it is hollow.

For the owners of the first renovation of the rough house, the following points should be noted:

The style and color of the tiles should match the style of the whole interior.

The category of ceramic tiles should be suitable for daily home life, in addition to being beautiful and good-looking, it is also necessary to take into account the needs of anti-slip, cleaning, scratch resistance, etc.

When laying tiles, it is necessary to pay attention to smoothing and smoothing the cement, and gently knocking it with a small mallet when pasting to prevent the generation of hollow drums. This is the point of laying tiles.

I think a lot of decoration is about skills, decoration will save time and effort, what are the bathroom decoration tiles? Here I have learned some content that I can provide you with your reference. 1. Pour the porcelain paste powder into water and stir into a paste (mixing ratio:

20kg powder and 6kg water), after stirring, it needs to stand still for about 10 minutes, and then stir slightly before use, which helps to increase the adhesion force. 2) Use a toothed scraper to apply the glue on the working surface to make it evenly distributed and form a toothed shape. 3) Knead the tiles on top during the drying time.