-
Anonymous users2024-01-24Your toilet installation is a little problematic, otherwise how can there be maggots, find a master who installs the toilet to help you get it well, the glass glue must be laid by the master, and the glass glue is used after 24 hours.
-
Anonymous users2024-01-23I'm going to ask the master to reinstall the toilet.
-
Anonymous users2024-01-22Just pay attention to hygiene, and the glass glue must be re-played.
-
Anonymous users2024-01-21It is recommended to remove the original glass glue and beat it again.
There are two reasons: 1 When installing the toilet, there is a sealant called the flange ring that is displaced, and a small amount of dirty water does not enter the drain after convenience, and the water will stink as soon as it dries. It will come out of the two small holes with a diameter of two centimeters on either side of the toilet or at the back of the toilet. >>>More
It is recommended to use neutral silicone glue, which has no odor and good adhesion. For all glass adhesives, the general curing time is about 24 hours. The better quality ones are faster.
1) The butter farad inside is not properly packed. 2) The silicone on the outside is not well laid. The best course of action is to remove the toilet bowl and replace the butter flange inside. Then remove all the old silicone and put on new silicone (keep the contact surface dry and waterless when playing silicone).
1. The sealing of all cement is very poor, the outer glass glue is just fooled, it is easy to leak again, the current situation is very troublesome, the toilet must be removed (whether it can be removed intact is a problem), the cement is cleaned, the toilet seal is installed, and finally the neutral glass glue is sealed around.
How to remove glass glue.
The removal of glass glue depends on whether the glass glue has been cured or not >>>More