How to press the heating valve in the toilet gas wall hung stove in the kitchen

Updated on Toilets 2024-09-16
2 answers
  1. Anonymous users2024-01-24

    Turn off the valve, and the inlet and outlet water of the natural gas wall-hung boiler will be connected to the nearest heating circulation pipeline. You can walk on the ceiling or go to the open pipe, involving openings, drilling, hot melt and other processes, it is not recommended that people without hands-on experience do it themselves, easy to leak.

  2. Anonymous users2024-01-23

    If the wall-hung boiler is only a radiator that has no other place to use water, the valve can be closed or not, and the water inlet valve can be turned off.

Related questions
4 answers2024-09-16

The wall-hung stove has nothing to do with natural gas cooking, the wall-hung stove is used to install radiators to heat up, and you can also boil hot water for bathing. Natural gas cooking is after your home is ventilated, just buy a gas stove to stir-fry and cook, and then connect a water heater to take a bath.

3 answers2024-09-16

The gas wall-hung boiler is installed in the lower part of the kitchen cabinet, theoretically speaking, it can be used normally, but because the overall design of the gas wall-hung boiler is handled in accordance with the high position, the main components and operating parts, display instruments, valves, etc. are arranged in the lower part of the boiler, and the installation position is too low, which will cause inconvenience to use and maintenance.

2 answers2024-09-16

Excuse me about the smoke of your wall-hung stove.

Whether the BAI tube is lengthened. When the wall hanging furnace is installed, there is a smoke exhaust pipe. There's a special section on it. >>>More

1 answers2024-09-16

Find one to change the water and electricity, come to the door to take a specific look, and make a reasonable layout.

4 answers2024-09-16

The gas hose should not exceed 2 meters, because the gas hose has a large gas resistance, the pipe is too long to cause the pressure of the end outlet to be very low or the pressure is close to zero (I have encountered dozens of cases in this situation), because the minimum inlet pressure of the gas is required when the wall-hung boiler is running: the general ignition critical air pressure is between 30% and 75% of the rated air pressure specified in the wall-hung boiler, and the pressure is too low, either the wall-hung boiler will not catch fire, or the combustion will not continue, Either the output power is not up to the rated value, and the room is not hot.