-
Anonymous users2024-01-24The aluminum buckle ceiling is easy to remove.
Use a thin knife to insert it into the seam of the red line cover, pry it down a little harder, pry it out a little, and pry it on the other side until the whole shade is removed.
It seems that the lamp is an energy-saving lamp, just find the same model and replace it.
-
Anonymous users2024-01-23This kind of is generally to remove the whole large one, and you can see the place where the lamp is removed on the back.
-
Anonymous users2024-01-22This is a bath bomb, the lamp and heater are integrated, and if you want to dismantle it, you have to remove it as a whole and replace the lamp.
Yes, equipotential must be done, which is electrical safety and to prevent casualties caused by lightning strikes.
To remove the ceiling, you only need to use a tool to close it on the hanging board, and then absorb all the air inside, and at the same time pull out one corner with the help of suction, and then pull out all four corners in the same way. >>>More
When decorating the bathroom, the ceiling needs to know how to install and dismantle. How to remove the bathroom ceiling? PChouse will take you to find out. >>>More
Use a thin knife or something to cut through the corner of one of the aluminum gussets, and gently pull down to get out a part, and then the back one is easy to dismantle.
There are two kinds of lamp disassembly and assembly: 1. Lamp with two legs - the lamp needs to be rotated 90 degrees and removed; 2. A lamp stand with a spring on one side of the lamp holder - you need to press the lamp on one side, and the other side will be separated from the base and the lamp tube will be removed. Try both of these practices to see which one suits you.